Ricoh Priport HQ9000 Network Manual page 91

Printer status
The following command can be used to get information about the current print-
er status:
msh> command
Command
status
info
prnlog [ID]
Note
❒ More information about print jobs is displayed if the ID number is added af-
ter the prnlog command.
Reference
For more information about the meaning of the data returned using these
commands, see p.103 "Understanding Displayed Information".
Network interface module configuration settings information
Use the "show" command to display the network interface module configura-
tion settings.
msh> show [-p]
Note
❒ Add "-p" (as above) to have the information displayed one screen at a time.
Reference
For more information about the meaning of the data returned using this com-
mand, see p.107 "Configuring the Network Interface Module".
System log information
Use the "syslog" command to display information stored in the system log.
msh> syslog
Reference
For more information about the displayed information, see p.111 "System
Log Information".
Information that is displayed
Status of printer.
Information about print jobs.
Information about the paper tray, output tray, printer
language of printer.
Lists the last 20 print jobs.
Remote Maintenance by telnet
9
85