Appendix; Printing Files Directly From Windows; Setup - Ricoh Priport HQ9000 Network Manual

Printing Files Directly from Windows

You can print files directly using Windows commands. For example, you can
print postscript files for PostScript3. Commands that can be used are as follows.
Operating system
Windows 95/98/Me
Windows 2000/XP, Windows Server 2003
Windows NT 4.0
The following explains setup and printing.

Setup

A
Make settings for the printer's network environment.
• Enable the TCP/IP protocol (the default is enabled).
• Set TCP/IP-related items, including the IP address.
Reference
p.11 "Interface Settings/Network".
p.100 "Using DHCP", when setting the IP address of the printer using DHCP.
B
Install the TCP/IP protocol in Windows to set the network environment.
Note
❒ Make sure network settings are checked by a network administrator.
C
When printing with Windows 2000/XP, Windows Server 2003, or Windows
NT 4.0, install "Printing service for UNIX" as the network software. When
printing with Windows NT 4.0, install "Microsoft TCP/IP printing" as the
network software.
Note
❒ When using Windows 95/98/Me, lpr cannot be used to print.
❒ This completes the setup for specifying a printer using an IP address when
printing. When using a host name to specify a printer, proceed to p.64 "Us-
ing a Host Name Instead of an IP Address" and continue the setup.

9. Appendix

lpr rcp
✓ ✓
✓ ✓
ftp
✓
✓
✓
63