Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IFM ANT410
Summary of Contents for IFM ANT410
- Page 1 Operating instructions RF-identification system ANT410 ANT411 Read/write head...
-
Page 2: Table Of Contents
ANT410 ANT411 Contents Preliminary note ............. -
Page 3: Preliminary Note
If the warning is not observed, damage to property is possible. 1.3 Legal and copyright information © All rights reserved by ifm electronic gmbh. No part of these instructions may be reproduced and used without the consent of ifm electronic gmbh. -
Page 4: Safety Instructions
ANT410 ANT411 2 Safety instructions • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system. -
Page 5: Cybersecurity
ANT410 ANT411 WARNING Operation of this device can cause radio interference in residential areas. w The device emits high-frequency electromagnetic waves that may interfere with the operation of electronic devices in the vicinity, including pacemakers, hearing aids and defibrillators. u Due to human exposure regulations, a minimum distance of 20 cm must be maintained between the device and persons. -
Page 6: Intended Use
ANT410 ANT411 3 Intended use The read/write head reads and writes ID tags without contact. For use, the read/write head must be connected to the DTE10x evaluation unit. The data is converted into digitally coded values and provided to the evaluation unit. -
Page 7: Items Supplied
ANT410 ANT411 4 Items supplied • Read/write head The device is supplied without installation and connection accessories. Available accessories: www.ifm.com. The optimum function is not ensured when using components from other manufacturers. -
Page 8: Function
ANT410 ANT411 5 Function 5.1 ID tags ID tags are passively operated without a battery. The energy required for operation is provided by the read/write head. The energy is provided via an inductive coupling. The integrated antenna coil in the read/write head generates a magnetic field which partly penetrates the antenna coil of the ID tag. - Page 9 ANT410 ANT411 Some ID tags are not recognised by the device if an incorrect password has been saved with the IO-Link parameter [ID tag password] and - the [Auto-read data”/“Auto-write data] operating mode is used or - the [ID tag history] records the user data.
-
Page 10: Device Overview
ANT410 ANT411 • [ID tag history] with the setting [Auto-Read] • Operating mode [Auto-read data] or [Auto-write data] • Automatic detection of the data block size (to activate, set the ID tag type to [auto]) Use dynamic operation: u Disable the listed functions for dynamic operation. -
Page 11: Installation
ANT410 ANT411 6 Installation 6.1 Notes on the unit installation When mounting several RFID units adhere to the minimum distances between the systems. Flush mounting of a read/write head in metal reduces the read/write distance. Device performance can be affected if positioned in the immediate vicinity of powerful HF emission sources such as welding transformers or converters. -
Page 12: Mounting Distances
ANT410 ANT411 ANT410 Fig. 3: Flush mounting ANT411 Fig. 4: Non-flush mounting 6.5 Mounting distances ANT410 Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 20 mm ≥ 40 mm... -
Page 13: Positioning Of The Id Tags
ANT410 ANT411 ANT411 Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 25 mm ≥ 90 mm 6.6 Positioning of the ID tags The sensing face marks the centre of the integrated antenna coil of the read/write head. - Page 14 ANT410 ANT411 ANT411 Fig. 6: Position the ID tag u Align the ID tag on the central axis of the antenna of the device. Distance read/write head Distance read/write head ID tag Type (D) in metal (D) in plastic E80371 20 mm 24 mm The indications in the table apply to static read/write operations.
-
Page 15: Electrical Connection
ANT410 ANT411 7 Electrical connection The device must be connected by a qualified electrician. u Disconnect power before connecting the device. Protection class III device (IEC 61010-2-201 chap. 6.5.2.101.4). The electrical supply must meet the following requirements: • Use of a power supply with limited output voltage (ES1 according to IEC 62368-1) •... - Page 16 ANT410 ANT411 Information on available sockets see: www.ifm.com. Cables with the following characteristics are suitable for the connection: Length Ohmic resistance (feed + return line) Effective cable capacity < 20 m max. 3 Ω max. 3 nF...
-
Page 17: Operating And Display Elements
ANT410 ANT411 8 Operating and display elements ANT410 ANT411 1 LED green: Operating voltage LED yellow: ID tag State Description green operating voltage OK operating voltage missing flashing slowly deactivated yellow on (permanently) ID tag detected on (pulse) ID tag read/written successfully... -
Page 18: Maintenance, Repair And Disposal
9 Maintenance, repair and disposal The unit is maintenance-free. u Contact ifm in case of malfunction. u Do not open the housing as the unit does not contain any components which can be maintained by the user. The unit must only be repaired by the manufacturer. -
Page 19: Approvals/Standards
ANT410 ANT411 10 Approvals/standards For approvals and standards, the following information is available: • Test standards and regulations: documentation.ifm.com • EU declaration of conformity and approvals: documentation.ifm.com • Notes relevant for approval: Package insert of the device and documentation.ifm.com... -
Page 20: Glossary
ANT410 ANT411 Glossary ID tag An ID tag is used to identify objects. A read/ write device is used to read the ID tag via a high-frequency radio signal. An ID tag consists of an antenna, an analogue circuit for receiving and transmitting (transceiver),...
Need help?
Do you have a question about the ANT410 and is the answer not in the manual?
Questions and answers