superbrightleds G45 User Manual

Important: Read all instructions prior to installation.
G45 RGBW LED String Lights
Parts Included
1 - String lights with power adapter
1 - RF Remote Control
1 - User Manual
RF Remote
Important Safety Instructions
1. Read and follow all instructions for installation and use.
2. Do not mount string lights near gas or electric heaters, fireplaces,
candles, or other similar heat sources.
3. Only install using the provided mount kits. Do not secure wiring using
staples, nails, or other objects that may damage the wiring.
4. Do not hang objects on or from the string lights, wiring, or cords.
5. Do not let the string lights rest on the power supply while in use.
6. Do not cover any part of the string lights with cloth, paper, or any other
material while in use.
Battery Installation
1. Open the battery compartment.
2. Insert two (2) new AAA batteries (sold separately).
3. Ensure the positive (+) and negative (-) ends are matched.
4. Close the battery compartment.
5. Properly dispose of exhausted batteries when replacing.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel–metal hydride, NiMH; lithium-ion, Li-ion) or any other
battery types.
1. Dimming - UP and DOWN
2. OFF
3. ON
4. RED
5. GREEN
6. BLUE
7. WHITE/WARM WHITE
8. RGB
9. ORANGE
10. YELLOW
11. LIGHT GREEN
12. LIGHT BLUE
13. PURPLE
14. PINK
15. SKY BLUE
16. STROBE
17. FADE
18. TWINKLE
19. BREATH
20. CHASE
21. RANDOM
22. RGB FLASH (press to change color)
23. VOICE SENSING MODE
Light Installation
• Hang the string lights indoors or outdoors with hooks or
cable ties (sold separately).
• The string lights can be extended up to the maximum of
three (3) strands.
• DO NOT exceed the maximum connectable strands as
this may lead to risk of damage or injury.
Operation
1. Connect the lights and hang as illustrated above.
2. Plug the power adapter into an AC outlet.
3. Use the remote control to set the desired mode:
• Use the Dimming buttons to adjust the brightness level
• Use the "W" button to switch between white and warm
white
• Press the "voice" button to select voice sensing mode
Model
No Sound
Clapping
Music
Bulb Replacement
• Unscrew the old bulb counterclockwise.
• Screw in a new bulb clockwise.
• Repeat as necessary.
• Appropriately dispose of old bulbs.
Troubleshooting
If the string lights do not work check the following:
• Ensure the plug is properly plugged into the outlet.
• Check that the number of connected strands does not
exceed the maximum of three (3) strands and that all
strands are properly connected.
• Check that the remote control is in range and properly
powered.
If the string lights still do not work contact a professional
electrician or contact us for assistance.
4400 Earth City Expy, St. Louis, MO 63045
User Manual
RGBW LED String Lights
G45
white light
flash
steady on with pulse to the music
Rev Date: V1 01/26/2024
866-590-3533
superbrightleds.com