Creone LSC KeyBox KeyWin6 Keycontrol Series Installation Manual page 14

Configure KeyWin6 Online IoT KeyBox
1. Enter service PIN 1234# to reach the konfiguration menu. A
Complete description of this menu you find on the next page.
2. If using static IP , scroll down and set DHCP to OFF (toggle with
arrow key).
3. Set IP adress / Netmask / Gateway / DNS.
4. Go to Reboot and start it by pressing #.
5. The KeyBox will now reboot and once completed it will show
the Pairing code in the display, the KeyBox is ready to connect
to the KeyWin6 portal.
6. Login to KeyWin6 and go to settings->Cabinet overview.
7. Press the + in the lower left corner to add a KeyBox.
8. Add the Pairing code from the KeyBox display and add a
name. This name can be edited later on.
9. The KeyBox will now synchronize, once the display shows the
chosen name the KeyBox registration is completed. Note this
synch can take a while, just wait until completed.
For more information and instructions regarding the Keywin6 portal, see our Keywin6 manual.
KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB 14