Page 4
Address: Malmgatan 8, 573 38 Tranås, Sweden Post address: Creone AB, Box 148, 573 22 Tranas, Sweden For more information about Creone and our products, visit www.creone.com. www.creone.com KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 5
Introduction DELIVERY MOUNTING KEYBOX CONFIGURATION MENU WIRING DIAGRAMS KeyControl Strips KeyBox 9500EC Creone RFID reader External reader External alarm KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 7
If you have any questions, please feel free to contact us and we will these instructions carefully before you install the system. be happy to help! YOUR DELIVERY SHOULD INCLUDE: Power cable TCP/IP cable IntelliPin Keybadges (optional) Keyring (optional) KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 9
Mounting KeyBox FOLLOW THE INSTRUCTIONS TO GET STARTED: Install the cabinet in the selected location. Follow the diagram below. 9400 SC (mm) 9500 SC (mm) KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 10
9550 SC Width 745 Floor KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 11
Locate the lock and pull the spring for both lock types, then you can open the door. Solenoid lock Rotary latch lock KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 12
TCP/ IP cable contacts below the connection to the components. cabinet, see step 2. KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 13
KeyWin6 online portal. If the neccessary network preparations is still to be performed the KeyBox display will show <Connecting...> until internet access. The physical part of the installation is now completed. KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 14
KeyBox registration is completed. Note this synch can take a while, just wait until completed. For more information and instructions regarding the Keywin6 portal, see our Keywin6 manual. KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
”#”. SET IP* Set the IP address that the cabinet should use, if you need To set a dot, use arrow right. KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 18
Strip cable – connected to the last key strip in your sys- Connection for external alarm (see more information tem (see more information on page 16). page 20). Connection for RFID-reader (see more information on page 18). KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 19
If the cables are not connected according to the diagram below, the display will either stop on <Starting> or a DOOR KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 20
From the last strip in the first cabinet, connect the cable to the top port of the expansion card(see illustration below). KEYBOX 9500SC KEYBOX 9500EC KEYBOX-PCB KEYBOX EC-PCB DOOR CREONE VALUE BOX REV2 DOOR CONTROL SERIES KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
To test card reader please see page 13, TEST CARDRE- on power again and check that the reader starts up. ADER. Now you need to insert the reader to your KeyWin6 sys- KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Page 22
”External lock” button. (see above) As soon as this is done the display of the cabinet changes to “LOCKED”. KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
6 and go to Settings. Mark the cabinet, go to edit and Återställ inställningar Spara Spara Återställ inställningar advanced, tick the ”Main alarm” button. (See below) KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB...
Need help?
Do you have a question about the LSC KeyBox KeyWin6 Keycontrol Series and is the answer not in the manual?
Questions and answers