Creone LSC KeyBox KeyWin6 Keycontrol Series Installation Manual page 12

4. To open KeyBox 9550 SC the procedure is different, view steps
below, use the key provided to open the service door at the
top. There you will find an emergency release string to open the
door and a switch to turn on and off the power to the cabinet
if you use the power and TCP/ IP cable contacts below the
cabinet, see step 2.
KeyWin6 - KeyBox SC manual Version 1.0.3. All and copyright reserved by Creone AB
To access the main board or make a custom installation,
open the door, unscrew the two screws on the right side of the
display. To access the power unit, unscrew the remaining five
screws on the plate below the display, see the next page for
connection to the components.
12