Nustep RB8 Quick Start Manual

1
Attach Power Source
The RB8 requires power to operate. Use AC
adapter provided with unit.
• Plug adapter into front or rear jack.
• Plug power cord into electrical outlet.
2
Operate 3600 Swivel Seat
To support easy transfers on and off RB8:
• Lift rear release lever to unlock.
• Swivel seat either direction (locks every 45°).
• Release lever to lock seat in position.
3
Adjust Seat Distance
• Lift front release lever to unlock.
• Slide seat forward or backward to adjust distance.
• Release lever to lock seat in position.
NOTE: Knee should have slight bend when leg is extended forward.
4
Adjust Seat Recline
• Lift black lever on left side of seat.
• Push on seat back to recline (up to 12°).
• Release lever to lock seat in position.
5
Attach Foot Straps
• Press red lever down to loosen strap.
• Place foot on pedal, slide under strap.
• Ratchet black lever to tighten strap.
NOTE: For best results, always secure foot straps before exercising.
For more details on adjusting the RB8, please refer to the user manual.
© 2024 NuStep, LLC | 22092 Instruction - RB8, Quick Start Rev A
RB8 Recumbent Bike
Quick Start Guide
front jack
For technical support, please contact:
support@nustep.com
800.322.4434 (US)
+1 734.769.3939 (International)
rear jack