Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chauvet Professional OVATION H-55FC
Summary of Contents for Chauvet Professional OVATION H-55FC
- Page 1 User Manual Model ID: OVATIONH55FC...
-
Page 2: Edition Notes
Edition Notes The Ovation H-55FC User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Ovation H-55FC as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, and Ovation are registered trademarks or trademarks of Chauvet &... -
Page 3: Table Of Contents
Color Temperature Chart ................Control Configuration ..................DMX Personalities....................16 Starting Address....................16 Control Channel Assignments and Values............ 16CH / 13CH / 12CH / 10CH ................17 7CH / 5CH / 3CH ......................HSV..........................Ovation H-55FC User Manual Rev. 1... - Page 4 W-DMX On/Off ....................19 Receive Reset....................19 Emergency Mode ....................19 White Balance ....................19 Red Shift ......................20 5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Contact Us ..................Warranty & Returns..................Ovation H-55FC User Manual Rev. 1...
-
Page 5: Before You Begin
The product has XLR sockets for DMX input and output. • Notice: This control circuit is isolated and belongs to the Class 2 data port. • The control circuit has a cumulative leakage current of less than 3.5 mA. Ovation H-55FC User Manual Rev. 1... -
Page 6: Safety Notes
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it. • In the event of a serious operating problem, stop using immediately. If a Chauvet product requires service, contact Chauvet Technical Support. Ovation H-55FC User Manual Rev. 1... -
Page 7: Fcc Statement Of Compliance
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Ovation H-55FC User Manual Rev. 1... -
Page 8: Introduction
Adjustable PWM to avoid flickering on camera Product Overview # Name 1 Fuse holder 2 Hard-wired DMX in/out 3 Indicator LEDs 4 W-DMX button 5 Safety loop 6 DMX in 7 DMX out 8 Fixed power cable Ovation H-55FC User Manual Rev. 1... -
Page 9: Product Dimensions
253.6 mm 11.31 in 287 mm 4.52 in 115 mm 4.52 in 115 mm 6.92 in 176 mm 2.36 in 60 mm 5.12 in 130 mm 6.65 in 169 mm 6.11 in 155 mm Ovation H-55FC User Manual Rev. 1... -
Page 10: Setup
3. Setup AC Power The Ovation H-55FC has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 11: Master/Slave Connectivity
Wireless Operation In optimal conditions, the Ovation H-55FC can operate up to 300 m (900 ft) away from a W-DMX transmitter. It is necessary to pair the W-DMX receiver in this product with a W-DMX transmitter for wireless operation. -
Page 12: Product Pairing With Rdm2Go
If the Ovation H-55FC has already been paired with the W-DMX transmitter, the red LED indicator will show the strength of the signal. In this case, the Ovation H-55FC is ready to work in wireless mode. To pair the Ovation H-55FC to a new W-DMX transmitter with an RDM interface: 1. -
Page 13: Sconce Mounting
Setup Sconce Mounting The Ovation H-55FC comes with a sconce kit for mounting the product to a wall. To install the sconce kit to the product and mount it to a wall: 1. Remove the mounting bracket by removing the bracket adjustment knobs. -
Page 14: Recess Kit Installation
Setup Recess Kit Installation The Ovation H-55FC comes with a recess kit. Follow the instructions below to install the product to a ceiling tile. • Make sure the ceiling can support the weight of the product and recess kit prior to installation. - Page 15 (x4) Trim ring 5. Install the trim ring to the support rail with the 4 included long M4 screws. Long M4 screw (x4) Make sure the trim ring is flush against the ceiling. Ovation H-55FC User Manual Rev. 1...
-
Page 16: Lenses And Filter
3. Re-install the front cover of the product with the 4 hex screws. Egg Crate The Ovation H-55FC comes with an optional egg crate which installs to the front of the product with 4 Phillips-head screws. Ovation H-55FC User Manual Rev. 1... -
Page 17: Operation
RDM2go Programming The RDM2go from Chauvet Professional, or another RDM-capable interface, is required to setup and program the Ovation H-55FC. Plug the interface into the DMX input of the product to access the menu map. Menu Map Refer to the Ovation H-55FC product page on www.chauvetprofessional.com... - Page 18 125–255 Sets blue LED maximum value Blue White Balance- 8204 125–255 Sets amber LED maximum value Amber White Balance- 8205 125–255 Sets lime LED maximum value Lime Disables Red Shift 82BC Red Shift Enables Red Shift Ovation H-55FC User Manual Rev. 1...
-
Page 19: Virtual Color Wheel
Operation Virtual Color Wheel The Ovation H-55FC includes a feature called the Virtual Color Wheel (VCW). This feature is available as a standalone control mode for manual use and as a control channel in select DMX personalities. More than 30 premixed colors, custom blended by Chauvet engineers, are available to call up for easier programming. -
Page 20: Color Temperature Chart
Chauvet makes no guarantee of the color output accuracy. Control Configuration Use an RDM2go from Chauvet Professional (or another RDM-capable interface) to set the control configurations and operate the product with a DMX controller. DMX Personalities To set the DMX personality: 1. -
Page 21: Control Channel Assignments And Values
056 063 Inverse square dimmer curve 064 071 Dimmer speed mode OFF 072 079 Dimmer speed 1 (fastest) 080 087 Dimmer speed 2 088 095 Dimmer speed 3 (slowest) 096 255 No function Ovation H-55FC User Manual Rev. 1... -
Page 22: 7Ch / 5Ch / 3Ch
Value 000 255 0–100% Standalone Configuration Use an RDM2go from Chauvet Professional (or another RDM-capable interface) to set the product to run in a standalone mode. Dimmer Curve To set the dimmer curve: 1. Go to the Dimmer Curve in themain level. -
Page 23: Static Colors
• 8200 > White Balance-Red • 8201 > White Balance-Green • 8202 > White Balance-Blue • 8204 > White Balance-Amber • 8205 > White Balance-Lime 3. Go to Set Value and select from 125–255. Ovation H-55FC User Manual Rev. 1... -
Page 24: Red Shift
To adjust the Red Shift function, do the following: 1. Go to the Specific PIDS in the main level. 2. Go to 82BC > Red Shift. 3. Go to Set Value and select 0 (Off) or 1 (On). Ovation H-55FC User Manual Rev. 1... -
Page 25: Maintenance
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Ovation H-55FC User Manual Rev. 1... -
Page 26: Technical Specifications
3, 5, 7, 10, 12, 13, 16, HSV Ordering Product Item Name Item Code UPC Number Ovation H-55FC (Black) OVATIONH55FCBLKH2 03031727 781462223144 Ovation H-55FC (White) OVATIONH55FCWHTH2 03031726 781462223137 UL 1573 CSA C22.2 No. 166 E113093 Ovation H-55FC User Manual Rev. 1... -
Page 27: Contact Us
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Ovation H-55FC User Manual Rev. 1...
Need help?
Do you have a question about the OVATION H-55FC and is the answer not in the manual?
Questions and answers