Page 2
Edition Notes The COLORado Batten 72X User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the COLORado Batten 72X as of the release date of this edition. Trademarks CHAUVET, the Chauvet logo and COLORado Batten 72X are registered trademarks or trademarks of Chauvet &...
Any reference to data or power connections in this manual assumes the use of Seetronic IP rated cables. The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol. COLORado Batten 72X User Manual Rev. 1 Page 1 of 35...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Page 2 of 35 COLORado Batten 72X User Manual Rev. 1...
2. Introduction Description The COLORado Batten 72X is a powerful IP65 batten-style wash light powered by 72 calibrated RGBWA LEDs. The compact, tour-ready unit produces superb color rendering and a vast palette from soft pastels to saturated hues. Its 16-bit dimming capability, as well as five selectable dimming curves provides smooth fades and facilitate its incorporation into aging traditional rigs.
DMX Linking You can link the COLORado Batten 72X to a DMX controller using a 5-pin DMX connection. If using other DMX-compatible products with this product, you can control each individually with a single DMX controller.
Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs. Procedure The COLORado Batten 72X comes with a bracket to which you can attach a mounting clamp directly. Mounting clamps are sold separately. Make sure the clamps are capable of supporting the weight of this product.
<ENTER> Navigates downward through the menu list or decreases the numeric value when in a function Control Options Set the COLORado Batten 72X starting address in the 001–512 DMX range. This enables control of up to 11 products in the 43-channel 3 RGBAW FUL personality.
Output Uses lower output intensity at Setting Steady Mode a constant rate to avoid going over the maximum temperature Matches output intensity of Legacy Mode COLORado Batten 72 Tour COLORado Batten 72X User Manual Rev. 1 Page 7 of 35...
Page 12
Shows current firmware version Information _ _ _ _ _ _ _ _ Shows product UID LABEL Batten 72X Shows RDM label Factory Resets the product to factory Reset default settings Page 8 of 35 COLORado Batten 72X User Manual Rev. 1...
155 172 White 9 173 190 White 10 191 208 White 11 209 226 White 12 227 244 White 13 245 255 White 14 COLORado Batten 72X User Manual Rev. 1 Page 15 of 35...
Page 20
Red 3 000 255 0–100% Green 3 000 255 0–100% Blue 3 000 255 0–100% Amber 3 000 255 0–100% White 3 000 255 0–100% Page 16 of 35 COLORado Batten 72X User Manual Rev. 1...
Page 21
010 099 Strobe, slow to fast 100 109 No function Strobe All 110 179 Pulse strobe, slow to fast 180 189 No function 190 255 Random strobe, slow to fast COLORado Batten 72X User Manual Rev. 1 Page 17 of 35...
190 255 Random strobe, slow to fast 1 RGB (3 Channels) Channel Function Value Percent/Setting 000 255 0–100% Green 000 255 0–100% Blue 000 255 0–100% Page 28 of 35 COLORado Batten 72X User Manual Rev. 1...
Master/Slave The Master/Slave mode allows a group of COLORado Batten 72X products (the slaves) to simultaneously duplicate the output of another COLORado Batten 72X (the master) without a DMX controller. To set each of the slaves: 1. Go to the Master/Slave main level.
4. Select Hold Last (continues the last received command) or Blackout (blacks out the product). Display Timeout This setting allows for selection of the amount of time the display backlight on the COLORado Batten 72X stays on after the last button is pressed on the control panel.
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. COLORado Batten 72X User Manual Rev. 1 Page 31 of 35...
7.78 x 6.34 m 14.16 x 12.23 m 25 m 9.72 x 7.92 m 17.71 x 15.29 m 30 m 11.66 x 9.50 m 21.25 x 18.34 m Field Beam Field COLORado Batten 72X User Manual Rev. 1 Page 33 of 35...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 34 of 35 COLORado Batten 72X User Manual Rev. 1...
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. COLORado Batten 72X User Manual Rev. 1 Page 35 of 35...
Need help?
Do you have a question about the COLORado Batten 72X and is the answer not in the manual?
Questions and answers