Dogtra 1900ncp field star series remote controlled dog training collar (21 pages)
Summary of Contents for Dogtra TD280C 2.0
Page 1
TD280C 2.0 EXPANDABLE UP TO 2-DOG SYSTEM: TD280C 2.0 ADDITIONAL RECEIVER Owner's Manual Please read this manual thoroughly before operating the TD280C 2.0 training e-collar.
12-volts to 24-volts and has an output of 10-volts 1500mA. GENERAL TRAINING TIPS ..........European Charger MAINTENANCE ..............Dogtra’s European chargers are designed for use with a TROUBLESHOOTING GUIDE ........... 220 volt AC electrical outlet. FCC WARNING STATEMENT ..........To purchase accessories, please visit www.dogtra.com or WARRANTY AND REPAIR INFORMATION ....
UNDERSTANDING YOUR TRAINING SYSTEM 1. Turning the System On/Off On/Off BUNGEE Magnetic STRING To turn the handheld transmitter on, hold down the Red Dot button on the right side of the transmitter until the LCD screen illuminates. To turn the transmitter off, hold down LED Indicator the same button on the right side of the transmitter until Light...
2. Transmitter Button Function STIMULATION TYPE OUTPUT STYLE The TD280C 2.0 has five buttons and a toggle switch on the Nick transmitter (two on the face of the transmitter, two on the 1 time rapid pulse of stimulation for split second left side, and one on the right side).
Page 7
Safety Level Lock/Unlock Button Example To lock in a chosen stimulation level tap the On/Off button If you set the Boost amount at 10, the Boosted Constant once you have selected your chosen level. The lock icon will output will increase as shown below. appear on the LCD screen indicating the selected stimulation Current displayed Boosted Constant...
Setting up Boosted Constant feature 3. TD280C 2.0 Code Setting Follow the steps below to code an TD280C 2.0 transmitter to 1. Set the stimulation level a new or existing TD280C 2.0 additional receiver. to zero. Rheostat Dial Coding the transmitter and receiver: 1.
3. Pressing 'Nick & 4. QUICK RELEASE BUCKLE STRAP Continuous Nick' and 1. To replace the strap, 'Boosted Constant' on prepare a new QUICK the transmitter when the RELEASE BUCKLE STRAP. receiver's LED is blinking Nick & Continuous Nick QUICK RELEASE Boosted BUCKLE Strap Constant...
6. Finding the Right Stimulation corrections to be inconsistent. Dogtra uses medical grade The TD280C 2.0 has a Rheostat Dial on the top of the stainless steel contact points and anti-microbial plastic to transmitter (0 is the lowest and 127 is the highest).
8. LED Indicator The LED indicator flashes every 4 seconds when the receiver The TD280C 2.0 has a 3/4-mile range. Depending on the is on and ready for use. The LED indicator will way you use your transmitter, the transmitter range may blink on both the transmitter and the receiver when the vary.
NOTE 2: The unit has a partial charge when it leaves the Dogtra facility. Upon receipt of the system, be sure to give it a full 2-hour initial charge before the first use away from any flammable substances.
10. Handheld Transmitter LCD Care for LCD Transmitters in Cold Temperature In cold temperatures (10°F or below), the Liquid Crystal Display (LCD) on your transmitter may be dim or slow to respond. Wait until the display becomes visible before selecting any training level. Even though the LCD screen might be dim or slow to respond when you press the Nick or Constant button, the transmitter will still function properly.
11. Attaching the Belt Clip 12. Using the Test Light 1. Turn on the receiver by touching the magnetic red dot on the back of the transmitter to the red dot on the receiver. The indicator light will come on for a moment then blink once every 4 seconds, showing that the receiver is ready Follow the instructions below to attach the included belt clip to use (the receiver needs to be charged if the indicator...
The test light should glow Your dog must know some basic obedience commands brighter with higher levels of stimulation and dimmer before beginning training with the TD280C 2.0. A dog with lower levels. learns by first being shown a command, followed by many Note: The test light may not be visible if the intensity repetitions over an extended period.
Troubleshooting If the unit is malfunctioning, please refer to the “Troubleshooting Guide” before sending it to Dogtra for service. If you have any questions or concerns, you may email them to info@dogtra.com, or call customer service at (888) 811-9111.
(response may be very subtle). charging port with clean water. 2. The LED indicator light comes on, but I do not feel – If the above does not resolve your issues, contact Dogtra any stimulation. customer service at info@dogtra.com or –...
- Increase the separation between the equipment and receiver. on any website, or in any other written material. No dealer of Dogtra products, nor - Connect the equipment into an outlet on a circuit different from that to any employee or agent of Dogtra, is authorized to make any additions, changes, or which the receiver is connected.
Page 19
Limitation of Remedies To register your product, visit www.dogtra.com/product-registration. Dogtra’s liability is limited to the cost of repair or replacement of the Dogtra product under Warranty. Any claim or action to enforce the Warranty must be commenced within thirty (30) days of the Warranty’s expiration for your product. Dogtra will...
Need help?
Do you have a question about the TD280C 2.0 and is the answer not in the manual?
Questions and answers