Magtek iDynamo 6 User Manual & Setup Manual page 5

Accept Payments Cont.
Contactless Sale
1. To initiate contactless sales, start by making sure your
iDynamo device is operational and receiving power.
2. Before proceeding, ensure that your e-payment/
smartphone/NFC capabilities are turned on and properly
configured. Note that the tap-to-pay position may vary for
certain smartphones depending on the make, model, and
NFC antenna location.
3. Proceed when the host software is ready.
4. Tap the card on the iDynamo's contactless reader.
5. iDynamo will emit a beeping sound, indicating that
processing is in progress.
6. Cardholders will be alerted to whether payment has been
accepted or denied.
7. Upon confirmation of a successful sale, cardholders will be
asked to remove their card from the iDynamo's contactless
reader.
How To Process a Refund
Merchants can only perform refunds on the iDynamo 6 using an
external POS portal. There is no way to perform refunds with
the iDynamo 6 at the device level.
How To Void Transaction
Void Credit Transaction (Card Present)
Merchants can only void transactions on the iDynamo 6 using
an external POS portal. There is no way to perform refunds with
the iDynamo 6 at the device level.
Note: Merchants can only void a transaction using the iDynamo 6 if
their iOS host allows it.
PaymentCloud LLC. • 800-988-2215 • support@paymentcloudinc.com
MagTek iDynamo 6
User Manual & Setup Guide
Table of Contents
Overview
2
Setup 3
Accept Payments
4
Settings 6
Troubleshooting 7
& Tips
Rights Reserved 10
Additional Information
Spec Sheet
Shop MagTek
iDynamo 6
V.022025 5