NEFF B6ACM7A 7A Series User Manual And Installation Instructions page 13

a When the cooking time has elapsed, a signal
sounds and the duration is at zero on the display.
Once the cooking time has elapsed:
3.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the ⁠ button.
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the cooking time
You can change the cooking time at any time.
is highlighted in the display.
Requirement:
Change the cooking time using the or button.
▶
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
is highlighted in the display.
Requirement:
Reset the cooking time to zero using the button.
▶
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
9.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is operating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
Press the button repeatedly until
1.
on the display.
Press the or button.
2.
a The display shows the calculated end time.
Use the ⁠ or ⁠ button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time is reached, the appli-
ance starts heating up and the cooking time counts
down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero on the display.
Once the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the ⁠ button.
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
Use the ⁠ or ⁠ button to delay the end time.
▶
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end time at any time.
Requirement:
Reset the end time to the current time plus the set
▶
cooking time using the button.
a After a few seconds, the appliance applies the
9.5 Setting the timer
The timer runs independently during the operation. You
can set the timer to times of up to 23 hours and 59
minutes, regardless of whether the appliance is on or
off. The timer has its own signal so that you can tell
whether it is the timer or a cooking time that has
elapsed.
Press the
1.
on the display.
Use the ⁠ or ⁠ button to set the timer duration.
2.
The timer duration can be set in 30-second incre-
ments up to 10 minutes. The time increments then
become bigger as the value increases.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
is highlighted
elapsed.
Once the timer duration has elapsed:
3.
‒
Changing the timer
You can change the timer duration at any time.
Requirement: is highlighted on the display.
Use the or button to change the timer duration.
▶
a The appliance applies the change after a few
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted on the display.
Use the button to reset the timer duration to zero.
▶
a After a few seconds, the appliance applies the
change and
is highlighted in the display.
seconds.
is highlighted in the display.
change and starts heating up. The cooking time
counts down.
button repeatedly until
Button Default value
5 minutes
10 minutes
Press any button to switch off the timer.
seconds.
goes out.
Time-setting options en
is highlighted
13