Footrests; Spring Preload - BMW HP2 SPORT Rider's Manual

5
68
Threaded fasteners not
tightened to the specified
torque can work loose or their
z
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Install screw 1 and tighten to
specified torque.
Handlebar fitting to
handlebar
5 Nm
Check the operation of the
clutch lever.

Footrests

Adjusting footrests
Slacken screws 1 on left and
right.
Turn left and right footrests 2
to the desired position.
The footrests engage with an
audible click.
Tighten screws 1 on left and
right.
Clamp, eccentric adjust-
ment, footrests
Thread-locking compound:
Micro-encapsulated
Clamp, eccentric adjust-
ment, footrests
15 Nm
To restore the factory setting:
advance the footrests to the
forward position.

Spring preload

Setting
Front and rear spring preload
has to be adjusted to suit the
rider's weight. Spring extension
is set by measuring the differ-
ence between the heights of the
suspension with and without the
rider's weight applied.