BMW HP2 SPORT Rider's Manual page 55

Press and hold down SET but-
ton 1 until the hours number
flashes.
Repeatedly press the SET but-
ton until the hours number is
correct.
Hold down the SET button un-
til the minutes number flashes.
Repeatedly press the SET but-
ton until the minutes number is
correct.
Hold down the SET button un-
til the minutes number stops
flashing.
The clock is now set to the
time you selected.
Adjusting brightness of
the LED strip
Select mode.
SETUP
You can make this adjust-
ment only when the motor-
cycle is at a standstill.
The instrument panel
has automatic day/night
switchover for the lighting. The
brightness of the LEDs is set for
daylight riding. This value is then
used as the basis for reduced
brightness for riding in the dark.
Press MENU button 2 once.
The cursor is to the left of the
field.
SELECT
Repeatedly press
SET button 1 until
appears
Flash Brightn
on the display.
4
51
z