BMW HP2 SPORT Rider's Manual page 45

The cursor is to the left of the
field.
LAP +
The lap counter flashes at
If the lap counter shows a num-
ber other than zero:
Reset the RACE monitor
( 41)
At the start of the race, press
SET button 1.
Measurement of race and lap
times starts.
The number of completed laps
is counted.
in the LAP monitor:
the lap time is shown
as of the second lap, the fast-
est lap time is shown
. in the SPEED monitor:
0
the fastest and slowest speeds
of the current lap are shown
At the end of each lap, press
the SET button.
Measurements for the next lap
are started.
Press and hold down the SET
button.
The measurements are
paused.
The number shown by the lap
counter flashes.
Press the SET button.
The measurements are re-
sumed.
Resetting RACE monitor
Press and hold down SET but-
ton 1.
If you reset the RACE mon-
itor in the next step all the
data stored in memory is deleted
and can no longer be called up in
INFO mode.
The measurements are
paused.
The number shown by the lap
counter flashes.
Again press and hold down
SET button 1.
4
41
z