Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
Rear-wheel stand
Installing rear-wheel
stand
Use screw 1 to set the rear-
wheel stand to the desired
height.
Remove retaining disc 2. To
do so, press release button 3.
Push the rear-wheel stand from
the right onto the rear axle.
Push the retaining disc on from
the left, while holding the un-
lock button down.
Hold the motorcycle with your
left hand to keep it upright and
use your right hand to grip the
lever of the rear-wheel stand 4.
10
137
z