Carrier - BMW HP2 ENDURO Maintenance Instructions Manual

Removing number-
3
plate carrier
10
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Remove the seat.
Remove plug 1 from its
holder and disconnect the
plug.
Remove protective plug 2
from its holder.
Connect plug 1 to protect-
ive plug 2.
z
Push wiring-harness end
of plug 1 into the holder of
protective plug 2.
Remove screws 3 on left
and right.
Remove screws 4 and
screw 5.
Remove the number-plate
carrier and thread out the
cables.
Reinstall screws 4.