Work To Be Carried Out After Ten Hours Off-Roading - BMW HP2 ENDURO Maintenance Instructions Manual

Cleaning slider tubes
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Use plenty of water to wash
out the space between the
fork protector and the slider
tube.
Use a damp cloth to wipe
clean the right and left slider
tubes. In this process,
be sure to pull the cloth
through between the fork
protector and the slider
tube at the front.
Push left and right sealing
boots 1 down.
Use a dry cloth to wipe dirt
off the sealing boots and
slider tubes.
Pack the groove of each
sealing boot with grease.
Molykote 111
Slide the sealing boots back
up into position.
Work to be carried
out after ten hours
off-roading
Work already described
Checking air filter for dirt
( 21)
Checking ease of move-
ment of footbrake lever
( 23)
Checking ease of move-
ment of shift lever (
Cleaning slider tubes (
Checking steering-head
bearing
Place the motorcycle on the
auxiliary stand (see Rider's
Manual).
4
25
24)
25)
z