Advertisement
Quick Links
Multiple heaters
Follow the directions for fitting a single heater. See below diagram for minimum
spacing distances between heaters (175mm) the heaters should be connected
together using a suitable IP44 rated box.
SPECIFICATION:
VOLTAGE: 240V 50Hz
WATTAGE: 60WATT/foot
FITTED WITH RE-SETTABLE THERMAL TRIP
FITTED WITH NON RE-SETTABLE THERMAL FUSE
IP44 RATED
ADJUSTABLE THERMOSTAT RANGE: 5°C - 40°C
GUARDS ARE AVAILABLE TO BUY SEPARATELY
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice.
Telephone: 0117 923 5375 Fax: 0117 923 5374
Victoria Road, Avonmouth, Bristol BS11 9DB
www.heatstore.co.uk
Tubular Heater with and
without adjustable Thermostat
Model No.: HTT1,HTT2,HTT3,HTT4
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE REFERENCE
IF IN ANY DOUBT ABOUT THE INSTALLATION OR USE OF
THIS PRODUCT, CONSULT A COMPETENT ELECTRICIAN.
Advertisement
Related Manuals for Heatstore HTT1
Summary of Contents for Heatstore HTT1
- Page 1 Follow the directions for fitting a single heater. See below diagram for minimum without adjustable Thermostat spacing distances between heaters (175mm) the heaters should be connected together using a suitable IP44 rated box. SPECIFICATION: Model No.: HTT1,HTT2,HTT3,HTT4 VOLTAGE: 240V 50Hz WATTAGE: 60WATT/foot IMPORTANT SAFEGUARDS FITTED WITH RE-SETTABLE THERMAL TRIP...
- Page 2 This product must be installed by a competent person Installation: and in accordance with the current building and IEE Single Heater Installation wiring regulations • Fit the plastic clips onto the fitting and slide towards each end of the • This product is designed for wall mounting and must be heater.
Need help?
Do you have a question about the HTT1 and is the answer not in the manual?
Questions and answers