LG Code Zero S97 Series Manual page 7

Check these out before use
Points to be aware of when using the
product
Make sure that the dustbin lid is on prior to using the
•
product. Otherwise, the suction strength will deteriorate
and cleaning will not be satisfactory.
Support the bottom of the product when cleaning an
•
elevated surface.
When leaving the product unattended or unused for an
•
extended period, make sure to place it properly on the
charging station or lie it on the floor. Otherwise, the product
may fall and get damaged or cause an injury.
Make sure that the exhaust filter is properly assembled
•
before using the product.
Environmental conditions such as temperature and humidity
•
may cause static to accumulate on the product. Please
contact the customer service department of LG Electronics
if the problem persists.
Any foreign object on the inlet port or extension pipe will
•
prevent the product from functioning properly. Make sure to
remove any foreign object such as a sock or stocking before
using the product.
The battery runtime will be shortened after using the
•
product repeatedly for an extended period due to its
characteristics.
When the battery is about to become fully run down during
•
use, the last block on the battery indicator will start to flash
and the product will power off after a while. Fully charge
the battery in this case.
Please use the product at normal room temperatures as
•
the battery runtime will deteriorate severely if used at
temperatures lower than 5℃ or higher than 38℃ for an
extended period of time.
Refer to Product specifications for battery run time details.
•
These times are a guide only and may be less depending on
•
the surface type.
It is recommended to swap the battery on the main body
•
and the battery on the auxiliary charging station regularly
for maintaining the maximum life of the batteries. (For
dual-battery models only)
-7-