3. Install the steering wheel
First connect the steering wheel cable to the instrument panel, then plug the
cable into the cable hole, and finally align the steering wheel with the connector.
4. Install the windshield
Align the windshield to the body position, and fix the clip to the hole position.
5. Connect the power cord
Connect the power cord to the battery.
Then turn on the power to check the circuits.
08
6. Install the seat
First remove the two screws at the front of the seat position, then align the seat
to the position on the body, and lock it with screws.
7. Install the rear view mirrors
Distinguish left mirror from the right one.
Then insert the mirrors into the hole site on the door.
09
Need help?
Do you have a question about the TQ10116DE and is the answer not in the manual?