Install The Front Wheels; Install The Rear Wheels - Costway TQ10116DE Manual

Remote Control Function and Instructions
● Never switch forward and backward operations in the moving, or the gear box
and motor will be damaged.
● Use the remote control with battery.
● Only the baby's legal guardian can
use the remote control.
● The product is operated mainly
by remote control.
Instructions:
Hold down Forward key & Back key for 3 seconds to start matching code,
the first LED flickers; Turn on the car body power now, the first LED lit up,
match code successfully.
Press "S" key to set up speed, 1 led lit up is low speed, 2 leds lit up is
medium speed, 3 leds lit up is high speed. Reverse the car only in low
speed.
Press "P" key to hold the brake, all LED flicker. If the remote control does
not run for 10 seconds, it will be in standby state. Press any key to wake up.
Battery Operating Specifications
Never mix new and old batteries, or different kinds of batteries.
Never mistake positive and negative electrode of battery, or short circuit will
happen.
Non-rechargeable batteries are not to be recharged.
Install batteries in a right polarity.
Only adults can recharge or change batteries.
Never make power port' s short circuit happen.
Recharge the battery only when it is taken out of the toy car.
Take exhausted battery out of the toy car and keep it out of children's reach.
Remove battery screws with a screwdriver, open battery cover, and in the
2.4G remote control model install two AAA 1.5V batteries in a right polarity.
06
Stop
Speed
Forward
Backward
Left Right
Indicator Light

1. Install the front wheels

First, remove the nut and a gasket from the front axle, then install the wheel,
gasket and nut onto the front axle in turn, tighten the nut with a wrench, and
finally install the wheel cover on the wheel. Install the front wheel on the other
side in the same way.

2. Install the rear wheels

First, remove the nut and gasket from the rear axle, then install the wheel,
gasket and nut onto the rear axle in turn, tighten the nut with a wrench, and
finally install the wheel cover on the wheel. Install the rear wheel on the other
side in the same way.
07