Mova K30 Mix User Manual page 11

Care & Maintenance
EN
Cleaning the Filter
1. Remove the filter and gently knock off
the floating dust on the surface.
Note: Replacing the filter every 3 to 6 months is recommended.
Cleaning the Dust Cup Assembly
1. Press the dust cup release button and
remove the cup.
3. Tap the filter gently or clean it with the
cleaning brush. Rinse the filter and the dust
cup with water.
Note:
• Cleaning the dust cup after each use or after the amount of dust in the cup reaches the MAX line is
recommended.
• Replacing the filter every 3 to 6 months is recommended.
17
2. When the filter is dirty and needs washing,
rinse it with water. It must be completely dry
before use.
2. Take out the filter and the cyclone assembly
from the dust cup, then empty the cup.
Note: To reduce the risk
of electric shock or injury,
do not rinse the cyclone
assembly with water.
4. Dry the filter and the dust cup
completely before use.
Care & Maintenance
Cleaning the Brush Assembly
1. Press the brush roller cover release
buttons to remove the brush roller cover.
Press the brush roller release button and
pull the handle to take out the brush roller.
3. Wipe the suction inlet with a dry cloth or
wet tissue.
Note：
• Do not rinse the brush assembly with water.
• Clean as needed. Replacing the brush roller every 3 to 6 months is recommended.
Cleaning the Tube and the Dirt Sensor
Remove the Clean and Used Water Tank. Wipe the tube and the dirt sensor with a wet cloth
before use.
Note: Do not rinse the tube or the dirt sensor.
2. Clear any hair and debris caught on the
brush roller with the provided cleaning
brush. Rinse the brush roller and the cover
with clean water and dry it completely.
4. Re-install the brush roller and the brush
roller cover until you hear a click.
Dirt Sensor
EN
18