Subscribe to Our Youtube Channel
Related Manuals for Flex LDE 16-8 125 R
Summary of Contents for Flex LDE 16-8 125 R
- Page 1 513.857_Schleifer_LDE_16-8_125 R.book Seite 1 Freitag, 6. August 2021 11:18 11 REFURBISHMENT GRINDER LDE 16-8 125 R...
-
Page 2: Table Of Contents
9000 rpm. Disposal information for the It is not permitted to use cutting discs, old tool (see page 12)! rubbing discs, flap discs or wire brushes. When using the renovation sander LDE 16-8 125 R, connect a class M dust extractor. - Page 3 513.857_Schleifer_LDE_16-8_125 R.book Seite 3 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Safety Warnings for Grinding and Wear personal protective equipment. Depending on application, use face shield, Sanding safety goggles or safety glasses. As WARNING! appropriate, wear dust mask, hearing...
- Page 4 513.857_Schleifer_LDE_16-8_125 R.book Seite 4 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Kickback and related safety notices Do not operate the power tool near flammable materials. Sparks could ignite Kickback is the sudden reaction to a trapped these materials.
-
Page 5: Noise And Vibration
513.857_Schleifer_LDE_16-8_125 R.book Seite 5 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Additional safety instructions use. This may significantly decrease the exposure level over the total working period. Use only extension cables approved for Identify additional safety measures to outside use. -
Page 6: Technical Data
513.857_Schleifer_LDE_16-8_125 R.book Seite 6 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Technical data LDE 16-8 125 R Machine type Renovation sander Mains voltage Protection class II / Power input 1,600 Power output 1 - 4,500 2 - 5,200... -
Page 7: Overview
513.857_Schleifer_LDE_16-8_125 R.book Seite 7 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Overview Spindle with threaded flange Hose retainer a Clamping flange Setting wheel for speed preselection b Clamping nut 10 4.0 m power cord with plug Handle, adjustable... -
Page 8: Instructions For Use
513.857_Schleifer_LDE_16-8_125 R.book Seite 8 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Instructions for use Check the position of the protective hood. Before initial operation Unpack the power tool and accessories and check that no parts are missing or were damaged during transport. - Page 9 513.857_Schleifer_LDE_16-8_125 R.book Seite 9 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Adjusting the protective hood Non-stop operation with detent NOTE The brush ring should protrude approx. 0–1 mm over the sanding plate. The protective hood can be adjusted in height to compensate for wear of the diamond sanding plate.
- Page 10 Using a dust extraction system 4. Switch on dust extraction. NOTE 5. Switch on the power tool. The use of a class M FLEX dust extractor is 6. Bring the renovation sander into recommended. position on the work surface. Connect suction hose to the 32 mm The brush ring / rubber suction ring ...
-
Page 11: Maintenance And Servicing
513.857_Schleifer_LDE_16-8_125 R.book Seite 11 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Brush ring The protective hood features a brush ring. This ring fulfils two functions: – Since the brush ring protrudes over the surface of the sanding plate, it is the first thing to come into contact with the work surface. -
Page 12: Spare Parts And Accessories
513.857_Schleifer_LDE_16-8_125 R.book Seite 12 Freitag, 6. August 2021 11:18 11 LDE 16-8 125 R Spare parts and accessories Other accessories, in particular cutting accessories, can be found in the manufacturer’s catalogues. Exploded drawings and spare-part lists can be found on our homepage: www.flex-tools.com... - Page 13 FLEX WARRANTY POLICY be of acceptable quality and the failure does not amount to a major failure. Chervon For warranty service, please contact FLEX Australia Pty Ltd, Unit 14, 5 Kelletts Rd, customer service on Australia 1300 000 346 Rowville, VIC 3178. Chervon New Zealand or New Zealand 0508 000 346.
- Page 14 513.857_Schleifer_LDE_16-8_125 R.book Seite 14 Freitag, 6. August 2021 11:18 11 Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Road, Rowville, VIC 3178. Email: support@flex-tools.com.au www.flex-tools.com.au www.flex-tools.co.nz For all FLEX warranty and enquiries, please contact Australia 1300 000 346 or New Zealand 0508 000 346...
Need help?
Do you have a question about the LDE 16-8 125 R and is the answer not in the manual?
Questions and answers