Troubleshooting Guide - Scheppach SC38 Instruction Manual

14. Troubleshooting guide

Fault
Motor does not start
Engine performance
drops
Imprecise scarifying
result
Motor is running, roller is
not rotating
Possible causes
• No electricity in plug
• Cable defective
• Switch, switch/plug block defective
• Connections to motor or capacitor
disconnected
• Housing clogged
• Soil is too firm
• Housing clogged
• Roller badly worn
• roller worn
• Wrong working depth
• Toothed belt is torn
www.scheppach.com
Rectification
• Check line and fuse
• Have machine checked by a customer
service center
• Have machine checked by a customer
service center
• Have machine checked by a customer
service center
• If necessary adjust working depth.
Clean housing so that the roller can run
freely
• Change working depth
• Clean housing
• Replace roller
• Replace roller
• Correct working depth
• By customer service workshop
GB | 29