In-situ ChemScan RDOX Instruction Sheet

Download this manual

Set up and deploy your RDO instrument in four simple steps. Read the overview below, and

then see the following pages for detailed instructions.

Connect

Install the RDO cap and attach the instrument to a

Wireless Rugged TROLL Com.

Calibrate (optional)

The RDOX is factory calibrated, but you can

perform a calibration at any time with VuSitu. Select

Calibrations from VuSitu's menu. Follow the on-

screen instructions.

Part numbers: 200036 (RDOX with 10m cable); 200035 (RDOX with 5m cable)

RDOX Portable Instruction Sheet

Pair

Use the VuSitu mobile app to pair your Wireless

TROLL Com with your mobile device.

Deploy

Select Live Readings to view real-time readings from

the instrument.

2022-03-03 | 2000352

Need help?

Do you have a question about the ChemScan RDOX and is the answer not in the manual?

Page 1 RDOX Portable Instruction Sheet Set up and deploy your RDO instrument in four simple steps. Read the overview below, and then see the following pages for detailed instructions. Connect Pair Install the RDO cap and attach the instrument to a Use the VuSitu mobile app to pair your Wireless Wireless Rugged TROLL Com.
Page 2 Getting Started Install the RDO cap. Align the RDO cap so the flat edge on the inside Slide the nose guard into place and thread it matches up with the flat edge on the sensor. Slide clockwise to install. the RDO cap into place. Connect the instrument to a Wireless TROLL Com.
Page 3 Connect. devices. An iOS device To connect to another automatically connects instrument, press Disconnect and then to the closest In-Situ Choose or Add Device. instrument. VuSitu displays a list of available connections. VuSitu displays the Tap the serial number Connected Instrument...