VEVOR 80165 User Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Saw
  5. 80165
  6. User manual
VEVOR 80165 User Manual

VEVOR 80165 User Manual

Track saw
Hide thumbs

Advertisement

Table of Contents

Technical Support and E-Warranty Certificate
www.vevor.com/support
Track Saw
USER MANUAL
MODEL:80165
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 80165 and is the answer not in the manual?

Questions and answers

Related Manuals for VEVOR 80165

Summary of Contents for VEVOR 80165

  • Page 1 Track Saw USER MANUAL MODEL:80165 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 3 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.
  • Page 4 Unmodified plugs and matching sockets will reduce the risk of electric shock. 2. Keep your body away from ground surfaces, such as pipes, heat sinks, and refrigerators. If you touch a grounded surface. 3. Do not expose power tools to rain or humidity.Water entering power tools increase the risk of electric shock.
  • Page 5 5. Don't overextend your hands. Always pay attention to your footing and balance. This allows for better control of power tools in the event of an accident. 6. Dress appropriately. Don't wear loose clothing or accessories. Keep your hair and clothes away from moving parts. Loose clothing, accessories, or long hair may involve moving parts.
  • Page 6 4. Store unused power tools outside the reach of children, and do not allow people who are not familiar with power tools and do not understand these instructions to operate power tools. Power tools are dangerous in the hands of untrained users.
  • Page 7 Electric circular saws use safety warnings Danger: a) Keep hands away from the sawing area and blade at all times. Always hold the auxiliary handle or motor housing with your other hand. If you hold the circular saw with both hands, you won't be hurt by the blade. b) Do not touch the underside of the workpiece.
  • Page 8 Reasons for rebound and operator protection: Rebound is the sudden reverse operation when the saw blade is squeezed, stuck, or off-center, causing the circular saw to lift uncontrollably and away from the workpiece towards the operator. When the saw blade is squeezed or tightly stuck by the closed cut, the saw blade is blocked and the motor reaction force drives the machine to snap back towards the operator.
  • Page 9 To avoid bouncing, place a support Do not place the support plate or panel plate or panel close to the cut. far from the cutting area. e) Do not use dull or damaged saw blades. Saw blades with no open edge or improperly installed can form narrow saw marks, which can lead to severe friction, stuck blades, and rebound.
  • Page 10 d) Always ensure that the lower guard covers the saw blade before placing the circular saw on the table or the ground. An unprotected, inertial saw blade causes the circular saw to retreat and cut an object on its travel, taking into account the time the saw blade stops after the switch is released.
  • Page 11 7. Some materials contain toxic chemicals. Be careful not to inhale dust and avoid skin contact. Follow the material supplier's safety tips. 8. Do not stop the saw blade by applying side pressure to it. 9. Do not use any grinding wheel. 10.

  • Page 12: Product Specification

    Product specification • Due to the ongoing development program, we reserve the right to change the specifications without notice. Item No. 80165 Blade Diameter 165 MM 90° 57 MM Cutting depth 45° 42 MM No Load Speed (rpm) 4500 Voltage...
  • Page 13  Storage of hexagonal wrench 1.Hex wrench； 2.Addtional handle The hex key is stored on the tool. To remove the hex key, pull it out. To install the Allen wrench, place it on the handle and insert it as far as possible. Remove or install the saw blade ...

  • Page 14: Bevel Cutting

    If the machine is not in Step 1 state when you want to install the saw blade, repeat Step 1 and do the opposite of step 2. Lock the knife screw clockwise. 1.Press screw 2.External press plate 3.Blade 4.Inner flange 5.Self lock ...
  • Page 15 -1°-47°Tilt 0°-45° : Loosen the front and rear locking knobs, tilt the machine, observe the pointer indicating the scale, point it at the desired Angle, tighten the locking knobs on both sides, so that it is fixed. -1°/47° : To get -1°/47° oblique cutting Angle, turn the top rod to make it in the picture below, tilt the machine, when the pointer points to - 1°/47°...
  • Page 16 Hold on to the tools. This tool is equipped with both an auxiliary handle and a handle. Using both handles at the same time is the best way to grip the tool. If both hands are on the circular saw, the blade won't cut them. The front of the base is placed on the workpiece for cutting without any contact with the saw blade.
  • Page 17 handles at the same time is the best way to grip the tool. Open the tool, press the tool down to the preset cutting depth (the B scale line on the depth adjustment board corresponds to the cutting depth when there is a guide rail), and then cut. ...

  • Page 18: Carbon Brush Replacement

    Upkeep Attention: • Before preparing for inspection or maintenance, be sure to turn off the switch and unplug the tool. • Clean the protective cover to ensure the removal of accumulated sawdust that may impede the operation of the protective cover system. A dirty protective cover system may limit its operation, resulting in serious injury.

  • Page 19: Optional Accessories

    If other accessories or devices are used, there is a risk of injury. Optional accessories or devices may only be used for the specified purpose. • Guide rail • Guide ruler • Angle gauge 80165 Parts Brakdown Fig Part Name Part Name Hex wrench Inner Flange Auxiliary handle...
  • Page 20 ST4*12 Cross pan head screw M5*40 Locking knob (triple) Rubber column φ5.5*9 Flat washerΦ6*Φ16*1 (removed) Motor housing Front leg Hexagon socket screw M8*45 Jacking rod Cable Set screw M5×10 O-ring d1=5 d2=2.5 Cable sheath Brush holder Return spring Carbon brush Spring frame Small semi-round square diameter Brush holder Cover...
  • Page 22 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
  • Page 23 Technical Support and E-Warranty Certificate www.vevor.com/support...

Table of Contents