VEVOR M1H-ZP7-254A-1 Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Saw
  5. M1H-ZP7-254A-1
  6. Manual

VEVOR M1H-ZP7-254A-1 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Support and E-Warranty Certificate
www.vevor.com/support
TABLE SAW USER MANUAL
MODEL:M1H-ZP7-254A-1
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the
major top brands and does not necessarily mean to cover all categories of tools offered by
us. You are kindly reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M1H-ZP7-254A-1 and is the answer not in the manual?

Questions and answers

Related Manuals for VEVOR M1H-ZP7-254A-1

Summary of Contents for VEVOR M1H-ZP7-254A-1

  • Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support TABLE SAW USER MANUAL MODEL:M1H-ZP7-254A-1 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

  • Page 3: Table Of Contents

    Table of Contents General Safety Rules---------------------------3 WARNING Safety Instructions for Table Saws----------4 Some dust created by power sanding, Additional Safety Rules-------------------------7 sawing, grinding, drilling, other construction activities contains Motor Specifications & Electrical chemicals known to cause cancer, Requirements-------------------------------------8 birth defects other reproductive harm.

  • Page 4: General Safety Rules

    General Safety Rules Read all safety warnings, instructions, illustrations and specifications provided WARNING with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term “power tool”...

  • Page 5: Safety Instructions For Table Saws

    General Safety Rules tained power tools . Do not use the power tool if the switch does not turn it on and off. Any power tool that can- Keep cutting tools sharp and clean. Properly not be controlled with the switch is dangerous maintained cutting tools with sharp cutting edges and must be repaired .
  • Page 6 Safety Instructions for Table Saws Use the appropriate saw blade for the riving Never reach around or over a rotating saw blade. Reaching for a workpiece may lead to ac- knife. For the riving knife to function properly, the cidental contact with the moving saw blade . saw blade diameter must match the appropriate riving knife and the body of the saw blade must be Provide auxiliary workpiece support to the...
  • Page 7 Safety Instructions for Table Saws Never reach over or in back of the saw blade TABLE SAW OPERATING to pull or to support the workpiece. Accidental PROCEDURE WARNINGS contact with the saw blade may occur or kickback Turn off the table saw and disconnect the may drag your fingers into the saw blade.

  • Page 8: Additional Safety Rules

    . move into the sawblade or other cutting tool . Use only VEVOR replacement parts. Any oth- If you stall or jam the sawblade in the work- ers may create a hazard.

  • Page 9: Motor Specifications & Electrical Requirements

    Motor Specifications & Electrical Requirements Motor Specifications If the outlet you are planning to use for this power tool is of the two-prong type, DO NOT REMOVE In the event of a malfunction or breakdown, OR ALTER THE GROUNDING PRONG IN ANY grounding provides a path of least resistance for MANNER.

  • Page 10: Symbols

    Symbols Safety Symbols The purpose of safety symbols is to attract your attention to possible dangers . The safety symbols and the explanations with them deserve your careful attention and understanding . The symbol warnings do not, by themselves, eliminate any danger . The instructions and warnings they give are no substitutes for proper accident prevention measures .
  • Page 11 Symbols IMPORTANT: Some of the following symbols may be used on your tool . Please study them and learn their meaning . Proper interpretation of these symbols will allow you to operate the tool better and more safely . Symbol Name Designation/Explanation Volts...
  • Page 12 Symbols (Certification Information) IMPORTANT: Some of the following symbols for certification information may be used on your tool . Please study them and learn their meaning . Proper interpretation of these symbols will allow you to operate the tool better and more safely . Symbol Designation/Explanation This symbol designates that this tool is listed by Underwriters Laboratories .

  • Page 13: Glossary Of Terms

    Glossary of Terms MOLDING: A non-through cut which produces ARBOR: The shaft on which a cutting tool is a special shape in the workpiece; used for join- mounted . ing or decoration . BARRIER GUARD: An assembly that consists NON THROUGH SAWING: Any cutting opera- of the mounting fork and two side barriers .

  • Page 14: Getting To Know Your Table Saw

    Getting To Know Your Table Saw 1. POWER SWITCH 10. TABLE INSERT Switch incorporates a hole for use with Removable for removing or installing a blade a padlock to prevent accidental starting . or other cutting tools . 2. ELEVATION WHEEL 11.

  • Page 15: Unpacking And Checking Contents

    Unpacking And Checking Contents WARNING WARNING shock during unpacking and setting up, do not plug the power cord into a source of power. This cord must remain unplugged when- ever you are assembling or making adjustments to the table saw with stand . Separate all parts from the packing materials and check each one with the illustration and the list of Loose Parts to make certain that all...

  • Page 16: Assembly

    Assembly ATTACHING THE Blade Guard FIG.5 To prevent personal injury, Riving Knife WARNING always disconnect the plug from the power source before attaching or removing the Blade Guard. POSITIONING THE RIVING KNIFE 1. Remove the table insert using finger hole. 2 .
  • Page 17 Assembly Plug the suction hose onto the suction adapted ATTACHING THE GUARD ASSEMBLY and the connecting piece of the saw Mount the saw blade guard(A) together with blade guard(A). Connect a suitable splint the bolt(B) on top of the riving knife(C), so that collector onto the suction adapter.
  • Page 18 If it is not, check the manufacturers catalog or web- CHANGING THE BLADE site . VEVOR offers Premium-Quality Profes- sional saw blades that match the requirements for NOTE: Clean blade of any excess oil before this tool .
  • Page 19 Assembly FIG. 13 BladeWrench 7.While holding the arbor shaft with the open- head hex wrench, use the ring-head hex wrench to securely tighten the arbor nut clockwise. (Fig . 13) 8.Install table insert. NOTE: The printing on different saw blades is not always on the same side . Outer Washer To avoid injury from a thrown workpiece,...

  • Page 20: Storage, Transporting, And Mounting

    Storage, Transporting, and Mounting TABLE SAW FOLDED STORAGE When not in use, the table saw can be stored upright. TABLE SAW TRANSPORTATION Lift the table saw up by grasping the carrying handle with the table facing to operator, then transport it from one place to another.

  • Page 21: Adjustments

    Adjustments ADJUSTING 0 AND 45 DEGREE POSITIVE STOPS To pre vent persona WARNING always dis c onnect t from the power source when making adjust- ments. Screw 1 . Turn the elevation wheel clockwise and raise FIG.23 the blade to its maximum height (Fig . 23) . Pointer ADJUSTING 0 DEGREE POSITIVE STOP Pointer...
  • Page 22 Adjustments ADJUSTING BLADE PARALLEL TO FIG.26 THE MITER GAUGE SLOTS Mark The blade was adjusted parallel to the miter gauge slots at the factory . In order to insure accurate cuts and help prevent kickback, this adjustment should be rechecked . If adjustment is necessary, follow the steps below .
  • Page 23 Adjustments ALIGNING RIP FENCE To prevent personal injury, WARNING FIG.29 always disconnect plug from the power source before making any adjustments. The rip fence must be parallel with the sawblade in order to prevent KICKBACK when ripping . When moving the rip fence, make sure to unlock and lock the fence with the rail lock handle and use the front rail knob to adjust the fence position .

  • Page 24: Basic Table Saw Operation

    Adjustments ADJUSTING THE TABLE INSERT The table insert slot contains four (4) adjustment screws for adjusting the height of the table insert (Fig . 37) . Place the insert onto the table . Place a straightedge (such as the metal ruler from a com- bination square) across the table top and insert top .
  • Page 25 Basic Table Saw Operation NOTE: To best secure the main guard for reloca- USING THE Blade Guard tion, adjust the blade to its low-est position . This Blade Guard has been designed for keeps the guard tight to the table surface and pre- modularity, enabling the use of multiple com- vents dam-age related to the guard swinging binations of the two main components –...
  • Page 26 Basic Table Saw Operation WORK HELPERS FIG.44 Workpiece Before cutting any wood on your saw, study all of the “Basic Saw Operations .” 45° Notice that in order to make some of the cuts, it is 1-1/2 Notch necessary to use certain devices, “Work Helpers,” like the Push Stick, the Push Block and the Auxil- iary Fence, which you can make yourself .
  • Page 27 Basic Table Saw Operation Always wear hearing protec- 10 . Do not pick up small pieces of cut-off mate- WARNING rial from the table . REMOVE them by push- tion during cutting, and gloves ing them OFF the table with a long stick . when handing saw blades .
  • Page 28 Basic Table Saw Operation RIPPING FIG.50 RIPPING is known as cutting a piece of wood with the grain, or lengthwise . This is done using the rip fence . Position the fence to the desired WIDTH OF RIP and lock it in place . Before starting to rip, be sure: A .
  • Page 29 Basic Table Saw Operation USING THE MITER GAUGE NOTE: When bevel crosscutting, attach the facing so that it extends to the right of the miter gauge CROSSCUTTING, MITER CUTTING, BEVEL and use the miter gauge in the groove to the right CUTTING, COMPOUND MITER CUTTING and of the blade .
  • Page 30 Basic Table Saw Operation CROSSCUTTING TIP: The space between the miter gauge bar and CROSSCUTTING is known as cutting wood the groove in the table is held to a minimum during across the grain, at 90°, or square with both the manufacturing .
  • Page 31 Basic Table Saw Operation REPETITIVE CUTTING When using the miter gauge in the LEFT hand groove, hold the workpiece firmly against the REPETITIVE CUTTING is cutting a quantity of miter gauge head with your left hand, and grip the pieces the same length without having to mark lock knob with your right hand .
  • Page 32 Basic Table Saw Operation NON THROUGH SAWING RABBETING Add an 8" high flat facing board to the fence, the RABBETING is cutting out a section of the corner full length of the fence (Fig . 59) . of a piece of material, across an end or along an edge (Fig .
  • Page 33 Basic Table Saw Operation CUTTING METALS AND MASONRY SPECIAL CUTTING TECHNIQUES Do not attempt to perform This table saw not rec WARNING WARNING WARNING ommended for c ing met- cuts not covered in this als, such as aluminum or copper, even with manual unless you are thoroughly familiar a special blade designed to cut these ma- with procedures and fixturing.

  • Page 34: Maintaining Your Table Saw

    Maintaining Your Table Saw Danger! LUBRICATION Always pull out the mains power plug before The gear case has been completely lubricated at starting any cleaning work. the factory . 1. Cleaning • Keep all safety devices, air vents and the •...

  • Page 35: Troubleshooting

    Troubleshooting WARNING Turnswitch“OFF”andalwaysremoveplugfromthepowersourcebeforetroubleshooting. PROBLEM CAUSE SOLUTION Powercord isnot plugged in. Plugsawin. Fuse or circuit breaker tripped. Replace fuse or reset tripped circuit breaker. Saw willnotstart HavecordreplacedbyanAuthorizedVEVOR Corddamaged. ServiceCenter orServiceStation. HaveswitchreplacedbyanAuthorizedVEVOR Burned out switch. ServiceCenter orServiceStation. Extension cord too light ortoolong. Replace withadequatecord.

  • Page 36: Technical Data

    TECHNICAL DATA ACMotor.............120V~ 60Hz RatedCurrent..............15A Cutting-Off Wheel......Ø254xØ15.875x2.8mm IdleSpeedn0.............4500RPM NumberOfTeeth.............40 CuttingHeightMax..........85mm/ 90°..................55mm/ 45° TiltingSawBlade..........infinite 0 - 45° Operating modeS625%:Continuousoperationwithidling (cycletime10minutes). Toensurethatthemotordoesnotbecome excessively hot,itmayonlybeoperated for25%ofthecycle atthespecified ratingandmustthen beallowedtoidlefor75% ofthecycle. Danger! Soundandvibration Soundandvibrationvaluesweremeasuredin accordancewithEN61029. LpAsoundpressure level....91dB(A) KpAuncertainty........3 dB LWAsoundpowerlevel....104dB(A) KWAuncertainty........3 dB Thequotedvaluesareemissionvaluesandnot necessarilyreliable workplacevalues.
  • Page 37 - 36 -...
  • Page 38 - 37 -...
  • Page 40 Technical Support and E-Warranty Certificate www.vevor.com/support Made In China...

Table of Contents