Advertisement
Technical Support and E-Warranty Certificate
www.vevor.com/support
TRACK SAW USER MANUAL
MODEL:8140
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VEVOR 8140
Summary of Contents for VEVOR 8140
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support TRACK SAW USER MANUAL MODEL:8140 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
- Page 3 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.
-
Page 4: Personal Safety
the risk of electric shock. 2. Keep your body away from ground surfaces, such as pipes, heat sinks, and refrigerators. If you touch a grounded surface, you increase the risk of shock. 3. Do not expose power tools to rain or humidity. Water entering power tools increase the risk of electric shock. - Page 5 5. Dress appropriately. Don't wear loose clothing or accessories. Keep your hair and clothes away from moving parts. Loose clothing, accessories, or long hair may involve moving parts. 6. If a device is provided for connection with the chip removal and dust collection equipment, ensure that it is properly connected and used.
- Page 6 4. Store unused power tools outside the reach of children, and do not allow people who are not familiar with power tools and do not understand these instructions to operate power tools. Power tools are dangerous in the hands of untrained users. 5.
- Page 7 b) Do not touch the underside of the work piece. The guard does not protect against the danger of the saw blade under the work piece. c) Adjust the cutting depth to the thickness of the work piece. The serration visible under the work piece should be less than one tooth height.
- Page 8 Reasons for rebound and operator protection: Rebound is the sudden reverse operation when the saw blade is squeezed, stuck, or off-center, causing the circular saw to lift uncontrollably and away from the work piece towards the operator. When the saw blade is squeezed or tightly stuck by the closed cut, the saw blade is blocked and the motor reaction force drives the machine to snap back towards the operator.
- Page 9 To avoid bouncing, place a support plate or panel close to the cut. Do not place the support plate or panel far from the cutting area. a) Do not use dull or damaged saw blades. Saw blades with no open edge or improperly installed can form narrow saw marks, which can lead to severe friction, stuck blades, and rebound.
- Page 10 lower guard may be slow to move due to damage to parts, gum deposits, or waste buildup. c ) Lift the lower guard manually only for special sawing, such as "plug-in sawing" and "combined sawing". Lift the lower guard with the retractable handle.
- Page 11 Wait until the saw blade has stopped completely before grabbing the cutting material. The saw blade will still move some distance after the power is turned off. 3. Be careful not to cut into nails. Check wood for nails and remove them before cutting.
-
Page 12: Product Specification
Improper use or failure to follow the safety rules in the instruction manual can result in serious personal injury. Product specification • Due to the ongoing development program, we reserve the right to change the specifications without notice. Item No. 8140 140 mm Blade Diameter 52 mm 90° Cutting depth 38 mm 45°... -
Page 13: Switch Operation
Operation instruction Switch operation 1. Lock button； 2. push rod； 3. Switch Before turning on the power, make sure to check whether the switch • button is active normally and is in the open and normal closed state. In order to prevent the user from accidentally pulling the trigger of the switch, the tool adopts a locking mechanism. - Page 14 Remove or install the saw blade Note: • Do not use saw blades that do not conform to the specifications specified in this manual. • The blade speed used should at least reach the maximum no-load speed in the specification value 1.Push rod 2.Self lock 3.Limited borad...
- Page 15 press knife and the external pressure plate, and remove the saw blade from the bottom. If the machine is not in Step 1 state when you want to install the saw blade, repeat Step 1 and do the opposite of step 2. Lock the knife screw clockwise.
-
Page 16: Bevel Cutting
Bevel cutting 1.Top rod 2.Lock knob 3.Pointer -1°-47°Tilt 0°-45° : Loosen the front and rear locking knobs, tilt the machine, observe the pointer indicating the scale, point it at the desired Angle, tighten the locking knobs on both sides, so that it is fixed. -1°/47°... - Page 17 Alignment at Align the cutting line with the 0° scale line on the base plate when a 0° cut is performed, and align the cutting line with the 45° scale line on the base plate when a 45° cut is performed. ...
- Page 18 The front of the base is placed on the workpiece for cutting without any contact with the saw blade. Then start the tool according to the switch operation and wait until the saw blade reaches full speed. Now, gently press the circular saw head down to the preset cutting depth, then simply move the tool forward on the surface of the workpiece to keep it smooth and flat until the cutting operation is complete.
- Page 19 guide ruler (optional) Angle gauges can be used for oblique cutting at different angles A guide allows you to make more accurate straight cuts. Just insert the guide ruler into the groove reserved on the bottom plate and lock the press ruler knob, the guide ruler can be pressed tightly by pressing the front and back press ruler plates, and adjust inside and outside according to the required cutting width, so that repeated cutting of the same width is...
- Page 20 Functional indication Temperature indicator,normally green, high temperature alarm is red Electric quantity display Each speed gear Energy saving gear Upkeep △ Attention: • Before preparing for inspection or maintenance, be sure to turn off the switch and unplug the tool. •...
- Page 21 1.Adjust 45° cut； 2.Adjust vertical Angle cutting These accessories or devices are intended for use with power tools listed in this specification. If other accessories or devices are used, there is a risk of injury. Optional accessories or devices may only be used for the specified purpose.
- Page 22 push rod gear case Spring frame Switch button Cross pan head Small semi-circular (encapsulated) tapping screw square diameter screw Needle roller Switch guide rod Rear leg bearing HK0808 Switch spring main gear socket head screw Retaining ring for switch Rear ruler plate φ26 hole Small semi-circular torsional spring...
- Page 24 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
- Page 25 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the 8140 and is the answer not in the manual?
Questions and answers