Advertisement
Quick Links
Advertisement
Related Manuals for Amylior Acekare Enjo
Summary of Contents for Amylior Acekare Enjo
- Page 1 Installation Guide...
- Page 2 Introduction This is the Enjo drive unit mounting bracket installation guide. This electric propulsion assistance system is designed to make pushing a wheelchair easier, providing invaluable discreet and effective assistance to caretakers when handling a wheelchair. Its light weight 8.8 lb (4 kg) and innovative features make it a practical accessory to help you get around every day. Purpose of the guide: This detailed guide is designed to give you step-by-step instructions for installing the Enjo mounting bracket.
- Page 3 Preparation before installing: Before beginning the process of installing the Enjo on your wheelchair, a few general recommendations are essential to ensure a smooth and proper installation: 1. Check integrity of parts: Before handling, ensure that all parts supplied with the Enjo are present and in good condition and that there is no visible damage or manufacturing defects.
- Page 4 Step 1: Positioning the side brackets to secure the support bar Measure the height from floor to tube (X value) Use a tape measure to determine the distance between the floor and the wheelchair tube. Take note of this measurement. Check the measurement ranges: •...
- Page 6 Step 2: Specific mounting kit to suit your wheelchair The appropriate mounting kit, which includes the side brackets and support bar, varies based on the type of wheelchair. The Enjo Order Form specifies the compatible mounting kit required for your selected wheelchair model. Using this information, please refer to the corresponding installation guide available on our website under Support >...
-
Page 7: Step 4: Fitting The Control Unit
Step 4: Fitting the control unit Make sure the control unit is switched off (LEDs off) before starting the installation process. The control unit is attached to the wheelchair handle using a saddle clamp system similar to that used on bicycles. Tighten the quick-release clamp gradually until it is firmly in position on the wheelchair handle tube. - Page 8 Distributed by: 3190 F.-X.-Tessier Vaudreuil-Dorion QC J7V 5V5, CANADA www.amylior.com Manufactured by: SARL Acekare 7 Rue de Mireport 33310 Lormont FRANCE www.acekare.com IG | P24044 | Enjo Installation | R01...
Need help?
Do you have a question about the Acekare Enjo and is the answer not in the manual?
Questions and answers