Download Print this page
Toyota PT949-03210-C0 Manual
Toyota PT949-03210-C0 Manual

Toyota PT949-03210-C0 Manual

Camry hv 2005- dashcam (digital video recorder)

Advertisement

Quick Links

TOYOTA
CAMRY HV
Preparation
Part Number:
PT949-03210-C0 (Dashcam)
Dashcam Kit Contents
Item #
Quantity Reqd.
1
1
2
1
3
1
4
1
5
1
6
1
Additional Items Required For Installation
Item #
Quantity Reqd.
Conflicts
N/A
Recommended Tools
Personal & Vehicle
Protection
Seat Protection
Dash Protection
Special Tools
Installation Tools
Panel Tool
Socket Wrench
Torque Wrench
Hooked Panel Tool
Needle Nose Pliers
Special Chemicals
VDC Approved Cleaner
General Applicability
MY25 and newer Camry HV models
Recommended Sequence of Application
Item #
Accessory
1
PT949-03210-C0 (Dashcam)
2
Issue: A 05/24/2024
2025-
Description
Dashcam Main Unit
SD Card Holder
SD Card
(
Micro SD, 16 GB Industrial Grade)
Window Tape with Plate
Wire Harness Trunk Cover
(Fixed length, clip-on)
Quick Start Guide
Description
Notes
Notes
Notes
With a 10 mm Socket
With a 10 mm Socket
For Sun Visor Clip Removal
Notes
To Clean Windshield
*Mandatory
Page 1 of 13 pages
DASHCAM
Vehicle Service Parts
Item #
Quantity Reqd.
1
Up to 2 pcs
2
3
4
Kit Service Parts
(may be required in the future)
Item #
Part Number
1
PT949-03250-AA
2
PT949-60220-AB
3
PT949-60220-AC
4
PT949-03250-AC
5
PT949-03250-AB
6
PT949-03250-AD
Legend
STOP: Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY: Use caution to avoid risk of
injury.
CAUTION: A process that must be carefully observed
to reduce the risk of damage to the accessory/vehicle
and to ensure a quality installation.
TOOLS & EQUIPMENT: Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK: This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE: This mark indicates that torque is
related to safety.
REGULATORY MARK: This mark indicates the
component is related to regulatory compliance.
(Digital Video Recorder)
(may be required for reassembly)
Description
Roof Console Clips if damage
occurs during removal.
P/N: 90467-09240
Description
Camera Unit + SD
SD Card 16GB Industrial Grade
SD Card Holder Assembly
Windshield Mounting Plate
(Bracket, Television Camera)
Wire Harness Connector Cover
(Connector, Drive Recorder)
Quick Start Guide
(Manual, Electric Multi-Vision)

Advertisement

loading
Need help?

Need help?

Do you have a question about the PT949-03210-C0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toyota PT949-03210-C0

  • Page 1 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Preparation Part Number: PT949-03210-C0 (Dashcam) Dashcam Kit Contents Vehicle Service Parts (may be required for reassembly) Item # Quantity Reqd. Description Item # Quantity Reqd. Description Up to 2 pcs Roof Console Clips if damage Dashcam Main Unit occurs during removal.
  • Page 2: Disconnect Battery

    Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). • Please see your Toyota dealer for a copy of this document. 1. Disconnect Battery (a) Protect the cargo sill before starting. (b) Do NOT touch or disconnect high voltage systems on a Hybrid Vehicle.
  • Page 3: Vehicle Protection

    TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 2. Kit Preparation (a) Check the Dashcam Kits for missing contents or damage. (b) Confirm Camera Angle Position – 2 visible recessed lines should be seen below the lens with the camera held in the as-installed orientation.
  • Page 4 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 4. Install Windshield Baseplate STOP: The front windshield must be at least 50°F (10°C). For Dealer Installations: (a) Using scissors, cut the provided paper template as indicated on the template. (b) Referencing the TSS cover, align to the indicated line on the template and affix the template to the windshield using tape.
  • Page 5 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 5. Remove Visor Mount Clips and Base (a) Remove the Sun Visor Hooks on the driver and Passenger side of the Map Light Console, to allow for gentle pulling down of the headliner without damage.
  • Page 6 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 7. Route the Dashcam Harness through the Headliner (a) Locate the Dashcam Pre-Wire harness above the headliner. The dashcam harness is tucked in behind the main harness near the center-front of the vehicle and pull it out.
  • Page 7 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 8. Fitting the Dashcam to the Base Plate NOTE: The Hang Tag that is attached to the Dashcam is only to be removed by the end user. As the camera turns on with...
  • Page 8 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure (c) Push the dashcam unit in towards the windshield to ensure all 4 T-hooks are in the correct starting point. All sides should have a consistent gap in the glass. (Fig 8-5) (d) Slide the Dashcam down towards the to Fig.
  • Page 9 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 9. Reinstall Overhead Console (a) Re-connect the harness for the overhead console, test map lights, and sunroof control if equipped. (Fig 9-1) (b) Check all console clips are in good condition and are present on the console.
  • Page 10 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure 11. Reconnect Vehicle Battery (a) Reconnect the Negative Battery Cable. Torque Wrench (b) Torque to 5.4 N•m (48 in•lbsf) (c) CAUTION: Do not touch the positive terminal with any tool. Fig. 11-1 12.
  • Page 11 (Fig 13-3) (d) Optional: Use the Live View feature of the Toyota Integrated Dashcam phone application to confirm the view angle if compensating for other accessories/obstructions.
  • Page 12 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Procedure Page 12 of 13 pages Issue: A 05/24/2024...
  • Page 13 TOYOTA CAMRY HV 2025- DASHCAM (Digital Video Recorder) Checklist - these points MUST be checked to ensure a quality installation. Check: Look For: Accessory Function Checks Removed items have been discarded & Verify parts. and replaced items are in place.
Save PDF