Advertisement
Quick Links
TOYOTA
MY22 TUNDRA
Preparation
Part Number:
PT949-34220 (Dashcam)
Dashcam Kit Contents
Item #
Quantity Reqd.
1
1
2
1
3
1
4
1
5
1
6
2
7
1
Additional Items Required For Installation
Item #
Quantity Reqd.
1
1
Conflicts
N/A
Recommended Tools
Personal & Vehicle
Protection
Seat Protection
Dash Protection
Special Tools
PT949-IAD0G Install Aid
Installation Tools
Panel Tool
Socket Wrench
Torque Wrench
Hooked Panel Tool
Needle Nose Pliers
Special Chemicals
VDC Approved Cleaner
General Applicability
All Models
Recommended Sequence of Application
Item #
Accessory
1
Dashcam (PT949-34220)
Issue: B 11/19/2021
Description
Dashcam Main Unit
SD Card Holder
SD Card (16 GB)
Window Mounting Plate
Foam Tape
Cable Ties
Quick Start Guide
Description
PT949-34220 (Dashcam Unit)
Notes
Notes
For Port Installations Only
Notes
With 10 mm Socket
With 10 mm Socket
For Sun Visor Clip Removal
Notes
To Clean Windshield
*Mandatory
Page 1 of 14 pages
2022-
DASHCAM
Vehicle Service Parts
Item #
Quantity Reqd.
1
Up to 2 pcs
2
3
4
Kit Service Parts
Item #
Part Number
1
PT949-34220-AA
2
PT949-08210-AB
3
PT949-08210-AC
4
PT949-08210-AD
Legend
STOP: Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY: Use caution to avoid risk of
injury.
CAUTION: A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT: Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK: This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE: This mark indicates that torque is
related to safety.
REGULATORY MARK: This mark indicates the
component is related to regulatory compliance
(Digital Video Recorder)
(may be required for reassembly)
Description
Roof Console Clips if damage
occurs during removal.
P/N: 90467-09240
(may be required in future)
Description
Camera Unit + SD
SD Card 16GB Industrial
Sd Card Holder Assembly
Window Plate with Tape
Advertisement
Related Manuals for Toyota PT949-34220
Summary of Contents for Toyota PT949-34220
- Page 1 SD Card 16GB Industrial PT949-08210-AB Item # Quantity Reqd. Description PT949-08210-AC Sd Card Holder Assembly PT949-34220 (Dashcam Unit) PT949-08210-AD Window Plate with Tape Conflicts Legend Recommended Tools STOP: Damage to the vehicle may occur. Do not proceed until process has been complied with.
-
Page 2: Disconnect Battery
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). • Please see your Toyota dealer for a copy of this document. 1. Disconnect Battery (a) Protect the fender / bumper before starting. (b) The engine components and coolant may be hot. -
Page 3: Vehicle Protection
TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure Hybrid Version Battery Disconnection: (i) Do NOT touch or disconnect high voltage systems on a Hybrid Vehicle. Only disconnect the 12V Battery. (j) The 12V Battery on the Hybrid vehicle is located under the rear seat on the driver’s... - Page 4 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure 4. Install Windshield Base Plate STOP: The front windshield must be at least 50°F (10°C). (a) For PPO Installations, please use 3D hard template with the part number “PT949-IAD0G” (Fig. 4-1) and follow Fig.
- Page 5 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure For Dealer Installations / No 3D Hard Template Available: (g) Using scissors, cut the paper template as indicated. For PPO Installations, please use 3D hard template provided. (h) Referencing the TSS cover, align to the indicated line and affix the template to the windshield using tape.
- Page 6 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure 6. Remove Roof Map Light Console (a) Remove the roof console by pulling down firmly on the forward edge (towards the front of the vehicle). Pull down firmly to release front 2 clips first then slide...
- Page 7 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure (c) Feed the Dashcam harness through to the open Map Light Console area. (Fig. 7-3) Fig. 7-3 (d) Pull the majority of the wire length through to the console area so that the camera is ready to mount on to the window plate.
- Page 8 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure 8. Fitting the Dashcam to Base Plate NOTE: The Hang Tag that is attached to the Dashcam is only to be removed by the end user. As the camera turns on with...
- Page 9 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure (c) Hook the Dashcam wire extension cover hooks into the leading edge of the headliner. (Fig. 8-5) Fig. 8-5 (d) Swing the Dashcam unit up towards the base plate. Check for alignment of the 4 T-hooks.
- Page 10 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure 9. Route / Bundle Wire Harness (a) Before proceeding with securing the harness, confirm the connectors have been protected with the provided foam tape. Use the provided foam tape to minimize any potential rattle concerns.
- Page 11 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Procedure 10. Reinstall Overhead Console (a) Re-connect harness for the overhead console, be sure to test map lights and sunroof control after battery. (Fig. 10-1) (b) Check all console clips are in good condition and are present on the console.
- Page 12 (Fig. 14-3) (d) Optional: Use the Live View feature of the Toyota Integrated Dashcam phone application to confirm the view angle if compensating for other accessories / obstructions.
- Page 13 TOYOTA MY22 HIGHLANDER 2022 - DASHCAM (Digital Video Recorder) Procedure Page 13 of 14 pages Issue: B 11/19/2021...
- Page 14 TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder) Checklist - these points MUST be checked to ensure a quality installation. Check: Look For: Accessory Function Checks Removed items have been discarded & Verify parts replaced items are in place...