KBC eCopper EECF1-LN1-R-MN-B Quick Start Manual

1 Channel EoC Receiver with PoC
Introduction
The KBC EECF1-LN1-R-MN-B is a fully ruggedized Ethernet over Coax (EoC)
one-channel receiver. It has one BNC port connecting the coaxial cable and
one 10/100Base-T port connecting the switch. This receiver provides
connectivity for 1* PoC/PoE version EECF1-LS1-T-IN-B or EECF1-LS1-T-MN-B
transmitter. Power is supplied to the transmitter through the coaxial cable.
Varying data rates are supported depending on cable distance and quality.
Plug-and-play design ensures ease of installation with no electrical adjustment
needed. LED indicators are provided to show the operational status of the unit
clearly.
This one-channel receiver is installed with a metal clip.
Features

1 coax port with PoC

1*10/100Base-T port

Connect to 1 unit of EECF1-LS1-T-IN-B or EECF1-LS1-T-MN-B

Coax data rate >50Mbps (300m)

Over current and short circuit protection

Unique PoC transmission protection design so that no power is output
when the transmitter end is not connected.
Downloads
Full specifications, features and additional information can be found on the
Attachment Tab.
Sales@collsam.com
(951)282-8707
Design and specifications are subject to change without notice.
Quick Start Guide
EECF1-LN1-R-MN-B
HTTPS://COLLSAM.COM
Images May Not Reflect the Actual Product.
eCopper™
Support@collsam.com
(213)210-6744