Related Manuals for LogTag LT5GEO
Summary of Contents for LogTag LT5GEO
- Page 1 LogTag ® LT5GEO System Guide © Copyright LogTag Recorders, 2024 Revision 0.4 Wednesday, August 21, 2024 © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc.
-
Page 2: Operation
Depending on the duration of the journey configured in LogTag Online, this transmission interval can vary up to 24 hours. © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc. - Page 3 While logging, the green LED will blink every 4 seconds if the logger has not triggered an alarm, or the red LED if an alarm has been triggered. © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc.
- Page 4 “Manage Team”, “Team”, and change the “Team Profile” to transit user. You should now be able to access the shipment menu shown below. © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc.
- Page 5 You can create new ones or select from preexisting profiles. © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc.
- Page 6 Note: You can add multiple loggers to the same shipment for their data to be conveniently consolidated. They can be cellular or non-cellular loggers. © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc.
- Page 7 Uses the logger’s geo-location tracking capability to display its current location on a map. Settings Edit shipment details, attached logger(s) and notification settings. Set the destination boundary arrival notifications. © Copyright 2024, LogTag North America Inc. All rights reserved. LogTag® is a registered trademark of LogTag North America Inc.
- Page 8 LogTag Online. If you press the button, and no LEDs light, or environmental data is missing from the chart in LogTag Online, follow the steps in the Troubleshooting section.
-
Page 9: Troubleshooting
Troubleshooting If the LT5GEO arrives at the destination, and no LEDs light when you press the Start/Check button for 1 sec, then to send the data to LogTag Online, perform the following: Charge the unit until the red Alert LED lights up steadily (if the battery is very low, the red LED will blink slowly, and you will not be able to transmit the data immediately).
Need help?
Do you have a question about the LT5GEO and is the answer not in the manual?
Questions and answers