Richter 6.18460 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment should be installed on an
impact absorbing surfacing / loose fill material
that accords with EN 1176 and is adequate
for a maximum free height of fall of 1.65 m.
B Foundations
Please see detailed instructions at the end of
this document.
Special information
Certified by TÜV Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Required space including safety distances (EN 1176)
900 x 1060 cm (recommended)
Ground elevation
Not to scale
all dimensions in cm
Foundations
Quality of concrete C25/30
1 piece 80 x 80 x 60 cm
Excavation depth 80 cm
2 pieces 60 x 60 x 60 cm
Excavation depth 80 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
ASSEMBLY
point of reference
INSTRUCTIONS
Car Tyre Swing
Order No. 6.18460
Components
Number of parts: 3
1 carrying beam with ground anchor
1 A-frame with steel feet
and distance battens
1 milled-off half tyre with floor, 4 chains,
universal joint and safety cable
Total weight:
Heaviest single part:
Largest single part:
ASSEMBLY INSTRUCTIONS
approx. 250 kg
approx. 150 kg
0.90 x 0.30 x 5.70 m
safety distance
foundations
Page 1