Richter 6.06000 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This element does not reach the free height
of fall limit of 0.60 m above which a specific
requirement for impact absorbing surfacing or
materials is necessary.
We recommend a fall height of ≤ 1.00 m.
B Foundations
Please take into account the special sheet:
„Notes on the construction of foundations."
For installation in loose material, an additional
anchorage in concrete is necessary on-site.
Special information
Certified by TÜV Süd Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Required space including safety distances (EN 1176)
depends on the number of jumping discs
Minimum distance 40 cm
Maximum distance 120 cm
Ground elevation
Scale 1:100
all dimensions in cm
Foundations
for firm ground conditions
excavation depth approx. 15 cm
+ blinding layer, if required
for loose ground conditions
excavation depth approx. 45 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
ASSEMBLY INSTRUCTIONS
Jumping Disc
Order No. 6.06000
Components
Number of parts: 2
1 jumping disc with springs and screws
1 pre-fabricated foundation
Total weight:
Heaviest single part
ASSEMBLY INSTRUCTIONS
approx. 170 kg
approx. 110 kg
safety distance
foundations
Page 1