Richter 6.11000 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment should be installed on an
impact absorbing surfacing / loose fill material
that accords with EN 1176 and is adequate
for a maximum free height of fall of ≤ 1.00 m.
B Foundations
Please take into account the special sheet:
„Notes on the construction of foundations".
Special information
Certified by TÜV Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Required space including safety distances (EN 1176)
600 x 220 cm
Ground elevation
Scale 1:50
all dimensions in cm
Foundations
Quality of concrete C25/30
1 piece 60 x 60 x 60 cm
Excavation depth 80 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
ASSEMBLY INSTRUCTIONS
See-Saw with Shock Absorbers
Order No. 6.11000
Components
Number of parts: 2
1 centre support with integrated shock absorbers
1 see-saw beam with 2 hand grips
Total weight:
Heaviest single part:
Largest single part:
ASSEMBLY INSTRUCTIONS
approx. 135 kg
approx. 80 kg
4.00 m length
Ø 18 - 21 cm
safety distance
foundations
point of reference
Page 1