Richter 6.82003 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment does not reach the free height
of fall limit of 600 mm above which a specific
requirement for impact absorbing surfacing or
materials is necessary.
However, we recommend surfacing corres-
ponding to a fall height of ≤ 1.00 m.
B Foundations
Please take into account the special sheet:
„Notes on the construction of foundations".
Special information
Certified by TÜV Süd Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical
alterations! For further information please call
your local agent.
Required space including safety distances (EN 1176)
ø 325 cm
Ground plan
scale 1:50
all dimensions in cm
Foundation
1 item 50 x 50 x 40 cm
excavation 70 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY INSTRUCTIONS · ASSEMBLY
Bollard
made of robinia
Order No. 6.82003 - 6.82006
Order No.
6.82003 30 cm
6.82004 40 cm
6.82005 50 cm
6.82006 60 cm
Components
Number of parts: 1
INSTRUCTIONS
Weight
approx. 8 kg
approx. 11 kg
approx. 14 kg
approx. 17 kg
safety distance
foundations
Page 1