Richter 6.51700 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment does not reach the free height
of fall limit of 600 mm above which a specific
requirement for impact absorbing surfacing or
materials is necessary.
However, we recommend surfacing
corresponding to a fall height of ≤ 1.00 m.
B Foundations
Please take into account the special sheet:
„Notes on the construction of foundations."
Special information
Certified by TÜV Süd Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Required space including safety distances (EN 1176)
685 x 340 cm
Ground elevation
Scale 1:50
all dimensions in cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY INSTRUCTIONS
Foundations
Quality of concrete C25/30
· ASSEMBLY INSTRUCTIONS
Balance Blocks
made of larch with steel feet
Order No. 6.51700
Components
Number of parts: 4
1 bundle: walkway on transport bars
2 support posts with steel feet
1 Bracing beam (steel)
Total weight:
Heaviest single part:
Largest single part:
2 pieces 60 x 80 x 55 cm
Excavation depth 75 cm
Excavation for bracing beams
ca. 305 x 15 x 15 cm
approx. 225 kg
approx. 140 kg
3.30 x 0.40 m
safety distance
foundatiions
point of reference
Page 1