Richter Rope Course Type 02 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment should be installed on an
impact absorbing surfacing / loose fill material
that accords with DIN EN 1176 / EN 1176 and
is adequate for a maximum free height of fall
of ≤ 3.00 m.
B Foundations
Please take into account the special sheet:
Notes on the construction of foundations.
Special information
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Recommended assembly tools and materials
set of carpenter's tools
set of ratchets
set of spanners
Torx T20, 25, 30, 40, 50
spirit level
battens for support during assembly
lashing straps
tear-resistant protective film
lifting equipment, approx. 1 t
thread locker (e.g. Loctite)
Attention:
During the assembly period (including the setting
of the concrete) it is not allowed to play on or put
any weight on the equipment in order to secure
stability during use after the assembly. Standard
concrete requires at least 2 weeks to set.
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY INSTRUCTIONS · ASSEMBLY
Rope Course Type 02
Order No. 6.49020
Components
Number of parts: 30
10 concrete columns, order No. 6.49101/100
1 hammock, order No. 6.49141
1 parallel rope, order No. 6.49117
1 bundle: horizontal square net
with 4 hand ropes, order No. 6.49127
1 bundle: grip ropes with 1 balancing rope
order No. 6.49121
1 bundle: PP balancing rope ø 80 mm
with 1 hand rope
order No. 6.49113
1 bundle: balancing rope with 1 hand rope.
order No. 6.49109
1 spider net, order No. 6.49122
1 firemen's pole, order No. 6.49138
1 bundle: triple rope (= 3 ropes) order No. 6.49130
1 whisk, order No. 6.49139
8 bundle: bracing battens
1 bag of accessories
1 bundle: 10 caps for concrete columns
Total weight:
heaviest single part:
largest single part:
INSTRUCTIONS
approx. 5.300 kg
approx. 550 kg
approx. 4.40 m Ø 0.30 m
Page 1