Floppy Diskette Drive Cable — Use this cable to connect the floppy diskette drive
!
to your NEC Versa FX system.
FDD/Parallel Port Cable Connector — Attach the large end of the connector to the
!
FDD/Parallel port on the left side of your system.
Connecting the External Floppy Diskette Drive
Follow these steps to connect the external floppy diskette drive to your NEC Versa FX
system.
Locate the external floppy diskette drive and cable that ships with your system.
1.
Attach the large cable connector to the connector on the floppy diskette drive.
2.
3.
Attach the small cable connector to the FDD/parallel port on the NEC Versa FX
system.
A – Floppy Diskette Drive Cable
B – Floppy Diskette Drive Connector
4.
Insert a floppy diskette into the drive bay and you are ready to go!
Connecting the external floppy diskette drive
C – FDD/Parallel Port
Using the System Drives and Bays 5-3