Installing The A&D Cd Software; Nec Info Center; Installing The Nec Info Center; Uninstalling The Nec Info Center - NEC VERSA FX Manual

Installing the A&D CD Software
Once the Application and Driver CD dialog box appears, follow these steps to install
the desired software.
Click the selection tab of your choice.
1.
Click the desired application, driver, or utility.
2.
3. Click the Install button to install your selection.
Follow the on-screen instructions to install your selection.
4. Click Exit to close the Application and Driver CD dialog box.
Remove the CD from the CD-ROM drive when the installation is complete.
5.

NEC Info Center

The Application and Driver CD contains the NEC Info Center, a fully navigational
online document that provides a multimedia tour, information for the traveling
professional and an online version of this printed user's guide.

Installing the NEC Info Center

To install the NEC Info Center simply follow the instructions, presented earlier in this
chapter, for launching the A&D CD and installing the software. For the most current
version of the NEC Versa FX User's Guide, periodically check our web site at
http://www.nec-computers.com/.

Uninstalling the NEC Info Center

Use one of the following methods to uninstall the NEC Info Center.
Use this method to uninstall the NEC Info Center using the Windows Add/Remove
!
Programs feature.
Go to Start, Settings, Control Panel, and double click Add/Remove Programs.
1.
Use the scroll bar, if necessary, to display the NEC Info Center item.
2.
3. Highlight NEC Info Center and click the Add/Remove button.
Select Automatic as the uninstall method and click Next.
4.
5. Click Finish to complete the uninstall.
When the uninstall is complete, click OK and close the Control Panel window.
6.
Using the Operating System and Utilities 4-7