NEC VERSA FX Manual page 50

Parameter
1
Video Timeout
1
Peripheral Timeout
Audio Device Timeout
1
Standby Timeout
Auto Suspend Timeout
LCD Suspend
Suspend Option
Auto Save-to-File
Panel Brightness
Suspend Warning Tone
Remote Power On
Wake Up Alarm
Resume Alarm Time
1
Available when power savings is set to Custom
2
Resume alarm time is selectable when wake up from suspend alarm is set
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
!
features when AC power is in use. When AC power is connected to your NEC
Versa system, power management is usually disabled. If you enable this parameter,
the system automatically activates the power management profile you set, even
when AC power is used.
Power Savings Level — Specifies one of four levels of power management. (Not
!
applicable in Windows 98 with ACPI.)
— High Performance — provides good battery life and best performance with only
minimal power conservation. Use while on the road or traveling short distances.
— Longest Life — provides best battery life, the maximum amount of power
savings, and good performance. Use while traveling long distances.
Power Management Setup
Default
Setting
2 minutes
On
1
On
4 minutes
1
10 minutes
Disabled
Suspend
Enabled
Auto
Enabled
Disabled
Disabled
2
Off
Alternate Setting(s)
30/45 sec.; 1/4/6/8/10/15 min.
Off
Off
Off
Off/1/2/6/8/10/15 min.
Off/5/15/20/25/30 min.
Enabled
STF
Disabled
User Defined
Disabled
Enabled
Enabled
Set time in 5 min. increments when
Wake Up Alarm is set.
.
Using the BIOS Setup Utility 3-11
.