Table of Contents
Advertisement
Note
AC adapter instead of the AC power cable. Connect the wall plug to the AC adapter and
to the properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet.
Powering On Your System
Power on the system as follows.
1.
Locate the latch on the front of the LCD panel, slide it to the right, and raise the
panel (see "Front Features" in Chapter 1).
Locate the power button and press it to turn on system power. For additional
2.
information about power button features and power LED status, see Chapter 1,
"Introducing the NEC Versa."
2-6 Getting Started
You can connect the wall plug that comes with the NEC Versa notebook to the
Using the AC adapter wall plug
Advertisement
Table of Contents
