Table of Contents
Advertisement
Use the Product Recovery utility to perform a Full Disk Drive restore as follows.
Check the Product Recovery CD title and make sure that it is the correct CD for
1.
your NEC Versa computer and operating system.
Put CD1 into the CD-ROM drive tray, close the drive door, and reboot your
2.
system.
3.
Read the License Agreement screen that appears. Use the VersaGlide touchpad to
position the cursor on the Accept button. Left click to accept the agreement.
You have the option of accepting or declining the agreement. If you decline the
agreement, the recovery utility exits.
In the NEC Product Recovery utility screen, use the VersaGlide touchpad to
4.
choose Full Disk Drive to restore your hard disk drive to its original factory
installed state.
applications installed on your system.
Read the Warning screen.
5.
A warning displays indicating that your hard disk is about to be erased.
Select Continue to proceed to perform a Full Disk Drive restore.
6.
If you select Back, the recovery utility returns to the prior screen, which has an exit
option. If you select Continue, an NEC screen loads.
At the NEC screen, click Continue to start the recovery process.
7.
A screen with progress bars is displayed and indicates the progress of the recovery.
process.
If you are restoring the Windows 2000 operating system, the recovery program
prompts you for the next CD.
If you are restoring Windows 2000, remove CD1 at the prompt for the next CD
and insert CD2 into the CD-ROM drive.
When the recovery process is complete for either Windows XP or Windows 2000,
you are prompted to remove the CD from the CD-ROM drive and reboot your
system.
Choose your restore option carefully to prevent losing data and
Do not turn off or disturb the system during the recovery
Using the Operating System and Utilities 4-13
Advertisement
Table of Contents
