Table of Contents
Advertisement
Use the power button in the following ways:
T Press the power button to power on.
T Press the power button to resume from a Windows or Hibernate mode and proceed
with normal operation.
T Perform the function as set in the Advanced tab of the Windows Power Option
Properties dialog box.
T Hold the power button in place for 4 or more seconds to initiate a power override
(powers off the system). Only use this option if you cannot power off your system
from the Start menu.
Note
power button and hold it in place approximately 4 to 5 seconds until the system powers off.
Shortcut Buttons
The Versa E120 DayLite system has two shortcut buttons that you can configure to
launch your default Internet browser and your default e-mail application. See "One-
Touch Start Button Settings Utility" in Chapter 4 for information about configuring the
buttons.
Status LEDs
The Versa E120 DayLite system uses status LEDs marked with icons to communicate
the status of system power and system operations (see the following figures and
descriptions).
A – Power LED
B – Battery Status LED
If you are unable to power off the system, use the power override. Press the
Power and e-mail status LEDs
C – E-mail Notification LED
Introducing the NEC Versa 1-7
Advertisement
Table of Contents
