4.
Connect the monitor's power cable and plug it into a properly grounded
wall outlet.
Follow any setup instructions in the monitor's user's guide.
5.
6.
Turn on power to the monitor.
Press the Suspend button to resume Active mode or power on the NEC
7.
Versa 4200.
Press the
CRT, or simultaneous display on both.
Printer
You can attach a printer with either a parallel or a serial connector. A paral-
lel printer connector has 25 pins; a serial connector has 9 pins. Some print-
ers come with both types of connectors.
Parallel Devices
To install a parallel device, such as a printer, you need a cable with a male
25-pin connector for the system and, for most parallel printers, a Centron-
ics®-compatible 36-pin connector.
4-24 Using the Hardware
and
function key combination to toggle between the LCD,
Fn
F3
Connecting a monitor