NEC VERSA 4200 Manual page 83

Turn the NEC Versa 4200 upside down with the front of the unit facing
2.
right.
Remove the drive cover as follows:
3.
T
Locate the drive cover release latch. Push the drive cover release latch
to the right while at the same time pressing the slide cover towards
you.
T
Lift the cover up and off the system.
Remove the hard disk drive as follows:
4.
T
Using your fingers, press down on the hard disk drive at the end clos-
est to the connector.
T
While maintaining pressure, slide the drive towards the front of the
system.
Removing the drive bay cover
Using the Hardware 4-17