External Monitor - NEC VERSA 4200 Manual

T
External mouse
T
External bar code scanner
T
External audio options.
In addition, NEC offers the following optional equipment developed to work
specifically with your NEC Versa 4200.
T
NEC Versa 4000 Series docking station
T
NEC Versa PortBar 4000
T
NEC Versa 4000 DC car adapter.
See the following sections for steps on using the options.

External Monitor

You can add a standard external monitor to your NEC Versa 4200. You
need a display signal cable (usually provided with the monitor). One end of
the cable must have a 15-pin connector for the system.
Follow these steps to connect an external monitor to your NEC Versa 4200.
1. Check that the NEC Versa is in Suspend mode or powered off and the
monitor power switch is turned off.
NOTE
while the monitor is being connected.
2. Open the port cover on the back of the system.
3. Attach the monitor's video cable (15-pin cable connector) to the monitor
port on the back of the system. Secure the cable connection with the
screws provided.
The NEC Versa must be in Suspend mode or powered off
Using the Hardware 4-23